The 94 symlinks in ~/.agents/skills and the full second copy in
~/.pi/agent/skills/blender-skills were the same packs under two roots, so Pi
reported a collision for every one of them on every start and silently dropped
the loser.
- The 93 upstream packs, the shared references/ notes and the LICENSE now live
once, flat and one level down, in the common agent folder ~/.pi/agent/skills/.
- The repository keeps only the project-specific pack:
.agents/skills/blender-skills/blender-director/. Its ../references/ links now
point at ~/.pi/agent/skills/references/ because it no longer sits beside them.
Its SKILL.md declared metadata.role twice (specialist, orchestrator), which is
fatal YAML - the pack had never actually loaded.
- AGENTS.md and Docs/toolchain.md describe the split and warn against copying the
common packs back into the repository.
Verified by walking all three discovery roots and parsing every frontmatter:
97 skills loaded, 0 malformed, 0 collisions.
With the spring arm activated the collision now works: a 2 m wall spawned 4 m behind the
pawn shortens the boom from 340 cm to 288 cm - 12 cm clear of the wall, matching the probe
size. -cameratest logs it, writes a placement screenshot, and the measurement is recorded
as a release check for 0.2.3.
Two traps documented because each one made a working mechanism look broken:
- a spawned static-mesh actor has no collision unless it is created deferred and given
its mesh and collision before FinishSpawning (three runs reported blocks trace=0)
- TargetArmLength is not rewritten when the boom shortens, so reading the property
reports the requested length; the camera's distance from the head is the measurement
Writes the 0.2.3 changelog entry and prunes the section from TODO.md.
A top-left readout for performance work: smoothed FPS and frame time, the worst
frame in a rolling two-second window, the active view, player speed, a frame
counter and the player's position in metres from the project origin.
- F3 toggles it, through the console variable gigline.Debug so a packaged build can
be checked without a rebuild (IA_ToggleDebug).
- On automatically for -perf and -qaselftest, so a performance capture never depends
on pressing a key first; off in the built demo, because a player should not see an
FPS counter over Hollywood Boulevard.
- The first two seconds are a warm-up window excluded from the worst-frame figure.
Without it the readout showed "worst 400 ms" for a healthy run: the startup shader
and streaming hitches dominated the rolling maximum.
Measured cost on the self-test route at 1440p: 2.64 to 2.77 ms average, about 5 %,
still 6x the floor. The release-check number stays the overlay-off run; the
overlay-on series is committed beside it as
Docs/perf/0.2.0-walk-frametimes-overlay.csv.
Docs: controls (F3 row, overlay section, switch table), release checks (cost row),
architecture building block view (HUD and input list).
-qaselftest at 2560x1440, TSR on, VSync off, no frame generation: 759 frames,
avg 2.64 ms (379 fps), p50 2.54, p95 3.39, p99 3.76, max 4.05 ms. The body, skin
material and animation add about 2 % over 0.1.5's 2.61 ms.
The same run passed every QA check: walk, reset 0 cm from spawn, pause/unpause,
transect 1456 samples with 0 holes, wall probe 0/35, facade probe 0/9.
Series committed as Docs/perf/0.2.0-walk-frametimes.csv and the result recorded in
the release-checks table next to the 0.1.0 and 0.1.5 numbers.
Docs/controls.md documented the 0.1.0 bindings only, so the camera toggle added with
0.2.0 was undocumented for the player-facing set and the review switches were
undocumented everywhere. Adds the V row, a changes-since-0.1.0 note that first person
stays the default, and a table for -thirdperson / -walk / -qaselftest with the note
that the walking capture is driven per shot rather than by the switch.
The in-game HUD line gains 'V view' so the packaged build documents it too.
Both were owner-requested removals. Nothing else referenced the review file except a
MEMORY entry, which now says the per-shot Approved column of Screenshots/README.md is
the only and authoritative record; release-checks keeps the 0.1.0 packaged-build
measurement as numbers and notes that its capture is no longer in the repository.
Conflicts resolved by union, not by picking a side:
- AGENTS.md keeps the stronger visual-review rule (README updated with every visual
change; a stale section is a defect).
- render_screenshots.sh keeps the absolute engine path from main and adds
-thirdperson from this branch - both were needed and neither alone worked.
- Screenshots/README.md now lists six shots, retail and third-person both embedded;
the known-issues tables merged, with the animation defect and unproven camera
collision added to main's rows.
- visual_targets.json carries both expectations.
- Architecture docs: ADR-8 (realistic buildings) and ADR-9 (third-person body) both
present and in numeric order; ADR-8 was mis-placed before the Quality Requirements
heading in the combined document by an earlier edit, now fixed.
- Binary conflicts resolved to main's content, since the retail trim only exists
there.
Checks: 82 tool tests, prettier clean, six embeds resolve.
One pawn, both rigs (ADR-9): a skeletal body hidden in first person, a
collision-tested spring arm, and a toggle that swaps the active camera and the
body's visibility. Shipped default stays first person; -thirdperson starts the
pawn in the third-person rig so the review shot is reproducible, and the
screenshot run passes it.
Three defects found and two fixed:
- The skin material had no SkeletalMesh usage flag, so Unreal silently substituted
the default grey. That is why the body rendered as clay.
- render_screenshots.sh still called ./Engine/... on this branch (the fix lives on
the facade branch and never reached main); applied here so the shots generate.
- OPEN: the idle clip is bound and PlayAnimation is called - the run logs the clip
name - but the body still renders in bind pose, arms out. Recorded with that
evidence in TODO.md rather than called done.
Shot 5 (demo-third-person) added and documented; camera collision is implemented
but unproven, since the spawn has open space behind it.
Two parametric cycles authored at 30 fps instead of hand-keyed poses, so the loop
closes by construction: GigLine_Idle (60 f, breathing sway, feet planted) and
GigLine_Walk (30 f, one stride, hip 0.45 rad / knee 0.55 / arm 0.32, arms
counter-phased, torso counter-rotation).
The limb axes were measured, not assumed: a probe rotated upperleg01.L by 0.5 rad
on each axis and read foot.L, which moved -0.022 -> +0.362 in Y on X, twisted on Y
and abducted on Z. Using the wrong axis here would have produced a character
scissoring sideways, which no import error would have caught.
The character export preset now bakes animation. Without bake_anim the exporter
writes a static bind pose and Unreal imports a mesh with no AnimSequence and no
error, so the importer asserts a clip exists and prints VERDICT: PASS/FAIL.
Verified in /Game/Test/Character: Idle 1.967 s and Walk 0.967 s, both AnimSequences,
skeleton intact. Playback on a possessed pawn is not yet verified: the demo pawn has
no visible body, so that check belongs with the third-person camera item.
The facade work started as a patch (0.1.4) and the 0.1.6 retail pass showed what
that costs: a patch has no release gate of its own, so a first pass that does not
yet read as the building can sit inside a done patch series. Realism is also the
leading quality goal, which a patch cannot carry.
New 0.9.0 - Realistic buildings, before the feature freeze: facade system with more
than one order, a profile library, storefront types, signage as decals, per-building
photo-matched models, a measured material library with a texel-density rule, and
LODs plus collision proxies. Former 0.9.0 freeze/beta/audit becomes 0.10.0 with
patches 0.10.1-0.10.3; 1.0.0 moves to weeks 39-44.
Recorded as ADR-8 (append-only) with a measurable gate BR-1..BR-5 in the quality
requirements, mirrored into the combined architecture.md. The 0.1.6 item now says
which of its gaps move to 0.9.0 and why more geometry cannot close them.
Each shot now has its own section with the image embedded, its view, expected
content and both verdicts, plus a status table at the top that links to them.
A path alone was not a review: the owner had to open five PNGs to judge a pass.
Also recorded in AGENTS.md (a path is not a review; approval ticks both the section
and the table row), the two retail assets and tools in the arc42 building block
view and the combined architecture.md, and prettier-formatted the changed files.
Owner decision: prioritise realism, keep the performance target but put it last.
Re-applied on a branch after the first attempt landed directly on main (reverted
there; see b8209ce).
- Quality goals (01 + combined architecture.md): 1 visual realism, 2 geographic
fidelity, 3 walkability/usability, 4 reproducibility/portability, 5 provenance,
6 performance efficiency.
- Quality requirements (10 + combined) reordered to match, with two realism
requirements added (a façade reads like the photographs; placement within ~1 m)
and the scenarios renumbered so QS-1 is the reference comparison, QS-9 the frame
rate.
- Guard on both documents so the order cannot become an excuse: performance is a
floor, not a preference - 60 FPS at 1440p without frame generation must be met at
every release; if realism cannot fit, cut the realism scope deliberately and
record it, never the frame rate. Walkability outranks realism in one direction: a
block you fall through is not a demo.
- Solution strategy and 'quality achievement' lead with realism and describe
performance as a budget, not a driver.
- Docs/release-checks.md: the performance check is the last section and the per-
version check list now opens with realism and closes with performance.
- ROADMAP gains a 'Quality priority' section; AGENTS.md gains the tie-break rule
beside the existing scope-cutting rule.
Owner decision: prioritise realism, keep the performance target but put it last.
- Quality goals reordered (01 + combined architecture.md): 1 visual realism,
2 geographic fidelity, 3 walkability/usability, 4 reproducibility/portability,
5 provenance, 6 performance efficiency.
- Quality requirements (10 + combined) reordered to match, with two new realism
requirements (façade reads like the photographs; placement within ~1 m) and the
quality scenarios renumbered so QS-1 is the reference comparison and QS-9 the
frame rate.
- Both documents carry the same guard so the order cannot become an excuse:
performance is a floor, not a preference - 60 FPS at 1440p without frame
generation must be met at every release; if realism cannot fit, the realism scope
is cut deliberately and recorded, never the frame rate. Walkability outranks
realism in one direction: a block you fall through is not a demo.
- Solution strategy and 'quality achievement' now lead with realism and describe
performance as a budget rather than a driver.
- Docs/release-checks.md: the performance check is the last check, with that reason
stated; ROADMAP gains a 'Quality priority' section; AGENTS.md gains the tie-break
rule beside the existing scope-cutting rule.
Drop the OpenStreetMap/ODbL attribution requirement, the Google imagery rule,
and the related F-4 requirement, risk R-4, release check, and TODO items across
AGENTS, PLAN, ROADMAP, README, setup, architecture sections, and manifests.
OSM data is now documented as local private use only. Also normalize
numbered-list indentation in the architecture docs.
Consolidated from the qa-input-collision-fix-0.1.0 work, applied onto main so
only the changes main genuinely lacks are carried (main already merged the
walkable-demo/collision work independently).
- fix(input): populate the UE 5.8 FInputMappingContextMappingData
DefaultKeyMappings field in ue_create_input_assets.py (the runtime reads
GetMappings()->DefaultKeyMappings.Mappings; the script previously wrote only
the deprecated 'mappings' array, so the cooked game had 0 runtime mappings
and every key silently did nothing — in packaged AND PIE). Regenerated
IMC_Default.uasset. WASD/mouse/Space/R/Escape verified working.
- fix(build): drop editor-only APIs that break the game target build —
UStaticMesh::PostEditChange() (GigLineAssetTools) and AActor::GetActorLabel()
(character ground probe). GigLine and GigLineEditor now both compile clean.
- tools: OS-level uinput input harness (input_emulation.py + input_test.py) and
run_pie.sh for PIE isolation; document the PIE-vs-packaged input test in
Docs/build.md. Removed the temporary SIM/EI/screenshot diagnostics from the
character.
PIE — Play In Editor: an Unreal Editor feature that runs the current
map as a live game session inside the editor.
UE — Unreal Engine: Epic Games' real-time 3D creation platform,
comprising the editor (including PIE), C++ framework, and runtime.
- Converted 13 individual .adoc section files to .md via
asciidoctor→docbook5→pandoc(gfm) + post-processing, placed alongside
the .adoc sources in Docs/Architecture/
- Rebuilt architecture.md from the individual section .md files
- Ran prettier --write on all .md in the repo (23 files changed):
normalised table column alignment, trailing whitespace, line breaks
- Added .agents/ to .prettierignore (vendored third-party content)
- All .md now passes prettier --check
architecture.md is the combined 450-line single-page rendering of all 12
arc42 sections. The Asciidoctor source (.adoc) files remain for future
editing; the Markdown is the readable deliverable.
The reported fall-through was a misdiagnosis: the player never fell. The
imported Terrain_DEM had only a bounding-box simple collision proxy, so a
downward trace anywhere in the block hit the terrain at Z 819 (the mesh
bbox max) and the street sat under an invisible 8 m lid. Standing on that
box looked plausible, which is why it read as working.
- add UGigLineAssetTools (C++): force CTF_UseComplexAsSimple on a static
mesh. UE 5.8 dropped bUseComplexAsSimpleCollision and Python cannot set
the flag; the builder also saves the asset, since the flag lives there
and a map-only save silently reverts it.
- spawn (-13336, -1150, 600): inside the carved corridor (the cut is a
10.7 m half-width around the road centreline), lands on the road at 456.
- fix ResetToStart returning to the mid-air PlayerStart captured in
BeginPlay: StartLocation is now captured on the first grounded frame.
- HighResShot 1280x720 instead of "1280 720", which is a multiplier.
- add -qaselftest: scripted walk/reset/pause on a core ticker plus a
swept ground transect. Results: walk 746 cm/2 s with Z steady, reset
0 cm from spawn, pause/unpause 1/0, transect 84 samples 0 holes.
- rebase onto main, keeping the frontage materials and placement fixes.
Split the former ROADMAP.md checklists into TODO.md, which now holds
all actionable work and progress marks. ROADMAP.md keeps milestone
goals, scope, and release gates as prose with no checkboxes.
Update AGENTS.md, Docs/, Geo/README.md, MEMORY.md, and README.md to
point to the new file roles.
README rewritten around the actual state (walkable DemoMap, blockout facades,
planned patches); Tools/README now lists all seventeen tools by role; build.md
gains the content pipeline table and the two enforced rules (one unit conversion,
collision decided at import). Setup gains a content-pipeline row, the toolchain
state notes the demo level exercises the engine path, release checks record the
Blender pre-check that backs traversal, PLAN points at ROADMAP/MEMORY/Screenshots,
and THIRD_PARTY_NOTICES gains rows for the hero facade and the candidate props.
Also fixed the last stale reference to Geo/scripts in MEMORY.md - a sweep found
old paths in six documents after the tool move, which the memory entry now warns
about.
Geo/tools/ is now every geographic script, with Geo/README.md documenting each
one; the Blender-side builders moved beside their outputs in Art/blender/*/ and
import their helpers from Geo/tools/osm_common.py.
That module gains to_unreal_local() and to_blender_local(): the only place in the
repository that multiplies metres by 100, so a second silent scale cannot be
introduced. block_height_report.py adds height provenance for the block — 3 of
15 buildings have no height data and render at a placeholder 6.4 m.
asset_metadata.py writes and audits <asset>.geo.json sidecars; four now exist
(hero-facade, terrain, street, blockout) and the audit recomputes each centre from
the origin, failing anything that disagrees.
Initial setup is complete: setup.md opens with a per-section status table and
drops the stale blockers, toolchain.md records that every pin has been exercised
on real work (engine compile + package, Blender/MPFB/Blosm assets, PROJ origin),
and MPFB's load-and-export check moves from pending to verified. Records the one
unexercised path — a fresh checkout — as a v0.1.0 release check.
AGENTS.md now states that planned work is checkbox items in ROADMAP.md marked
open, in progress, or done, and that discoveries, gotchas, notes, and bugs go to
MEMORY.md for coordination between collaborators. MEMORY.md is seeded with what
this build-up actually cost: the Unreal read-only-home crash, Blender/Blosm
headless workarounds and the spherical projection, the tiled-TIFF DEM trap, the
reference licensing and throttling rules, and the LFS silent-blob trap.
Also stages the concurrently created Unreal project files, and stops per-project
Build/ output (FileOpenOrder logs) from entering the repository.
Extraction finished clean (73 GB). The editor crashed twice with signal 11, but
the log named the real cause: the agent shell's home is read-only, so the editor
could not create ~/.config/Epic and died in pre-init. With HOME redirected it
reaches 'Engine is initialized' under -NullRHI, proving the install and bundled
libraries are sound on Bazzite.
The Vulkan RHI is still unproven: the successful run used -NullRHI. A desktop
terminal run is the remaining step, recorded in Docs/environment.md, ROADMAP and
the toolchain pin.
94 MIT-licensed skill packs plus their shared references, copied unedited from
the local checkout of github.com/arjun988/blender-skills at commit 8f778d2
(1.2 MB, 269 Markdown files). They are agent instructions, not add-ons; the
pipeline still drives Blender headlessly through bpy, so the optional Blender MCP
server is not required. Provenance recorded in THIRD_PARTY_NOTICES.md and the
version, source, and update procedure in Docs/toolchain.md.
Tools/blosm_blockout.py imports the committed extract in 3Dsimple mode and
reports per-building dimensions so a units failure is visible in the log. The
result (87 meshes) is committed as the blockout baseline: hero 25.68 x 54.88 x
14.50 m against 25.75 x 54.88 m of OSM geometry, so the import is 1:1 metres.
Two headless defects needed working around: the asset-directory check that
fires before mode is honoured, and an empty default-level table sending the
add-on down a broken relative import. Member fetching stays off so the import
does not depend on Overpass.
QGIS stable is 4.2.3 on the current KDE runtime; the stale 3.28.9 lts install
stays flagged for removal. PROJ 9.9.0 from that flatpak turns the recorded
origin into E 376515.389 / N 3774224.083 (NAD83 UTM 11N), with six control
points whose projected spans reproduce the OSM footprint measurements. Engine
decision recorded: 5.8.4 is downloading, 5.2.0 stays only as a fallback.
zwitschi