The site exporter now splits sidewalks and kerbs into ~20 m pieces
(SEGMENTED / SEGMENT_M in Art/blender/site/export_site_fbx.py), 56 slices in all, so each has a
bounding box that means something where it stands instead of reporting the highest point on a
279 m slope. They import and stage (63 site meshes in the demo map).
The hypothesis behind it is dead, and that is the useful part: with the invisible sidewalk
stopgap retired, the player now falls to Road_Hollywood at 366 - the slices do not block either.
So the 279 m aspect ratio was never the cause; a 20 m slice of the same mesh fails identically.
The sidewalk geometry itself is what does not collide, and the next place to look is its shape -
an open surface with no volume, inverted winding or zero-thickness triangles - not the import
flags and not the size.
The stopgap retirement stands: the player walks on the road, which is real geometry that does
collide, rather than on an invisible ledge.
The probe now logs the horizontal distance from the player to the impact point. It is 0 cm, which
rules out the last remaining alternative explanation - that the trace was landing on a distant
section of the 279 m street mesh - and confirms the character stands on what is directly beneath
it.
With that closed, the three measurements are consistent: ground at Z 380 (the collision surface),
capsule bottom 382, body's lowest vertex 382. The engine's geometry is right. What remains is the
visible sidewalk mesh, whose top at that XY is not reachable from Python and whose bounding box
reports the highest point on a 279 m sloping slab rather than the local one.
Ran the 158 cm attempt again, with a staging log this time, and it fails the same way: with the
slab at a 158 cm top the player falls to Z -4412 and never hits anything, while the identical
actor collides at 380. Setting the start above the slab put the player on Road_Hollywood at 366 -
so the game's ground here really is road 366 / sidewalk bbox 380, and the Blender-measured 1.58 m
does not describe the shipped map; the blend predates the terrain. The 158 hypothesis was wrong and
is retracted in TODO.md.
Geometry is now measured end to end:
top surface under player: Z=380 mesh=Cube (actor Z 470)
body: mesh bottom 382, capsule bottom 382, body above capsule 0 cm
The body's lowest vertex and the capsule bottom agree within 0 cm, sitting 2 cm above the collision
surface. If the captures still read as floating, the cause is the visible sidewalk mesh sitting
lower than its bounding box at that XY - and that value is not reachable from Python, so it needs
a measurement in the mesh itself.
Measured in the source geometry (Art/blender/site/site-2026-11-06.blend, metres): at the
player's street section the north sidewalk tops out at 1.58 m and the road at 1.45 m. The 380 cm
that has driven every placement decision came from the UE mesh's bounding box, which spans 279 m
of sloping street and takes the highest point anywhere - 2.2 m above the surface where the player
stands. That is the float, quantified at last.
Moving the invisible collision slab to a 158 cm top did not work: with an 8 cm slab the player
fell to Z -4410, and with a 50 cm slab it fell to the same place, so the slab was not colliding
at all after the change. I could not identify why within this pass, so the change is reverted and
the 380 stopgap restored - verified again by trace (mesh=Cube at Z 380, actor Z 470).
Recorded in TODO.md with the two numbers and the next step: find why the slab stops colliding when
it moves down, then set it to 158 and the player start to 247.
Records the finding rather than the tool that failed to fix it: the staged Sidewalk_North mesh
carries QueryAndPhysics and CTF_USE_SIMPLE_AND_COMPLEX with auto-generated collision, and still
lets both a trace and a capsule through. The likely cause is a degenerate convex hull for a
279 m x 8.6 m x 3.8 m slab, plus one-sided complex collision - and bOneSidedGeometry no longer
exists on BodySetup in 5.8, so the flag cannot be flipped from Python.
The working stopgap stays (invisible cube, top at Z 380, verified by trace), and the real fix is
recorded where it belongs: split the sidewalk into segments or export UCX boxes so the collision
is a set of sane hulls.
Deletes Tools/ue_fix_ground_collision.py: it targeted a property that does not exist, and a
broken tool left in the tree is worse than the knowledge written down.
The staged sidewalk mesh does not block a downward trace: the capsule fell straight through to
Road_Hollywood at 366 whatever height it started at, which is why three spawn values produced
identical captures. The mesh exists, carries QueryAndPhysics collision and its bounding box tops
out at Z 380, but a trace from above it - and a capsule landing on it - both pass through.
Until the kit mesh's own collision is fixed, an invisible 279 x 8.6 x 0.08 m cube supplies the
surface: top at Z 380, hidden in game, BlockAll. Verified in the same run that used to report the
road:
top surface under player: Z=380 actor=StaticMeshActor_52 mesh=Cube
foot Visibility: actor Z 470, feet 382, hit Z 380
So the capsule now rests on the pavement 2 cm above its surface.
The captures still read as floating in the ground-level shots, and the table records that: the
stopgap fixes what the character stands on, not what the camera sees, and those two disagree
until the sidewalk mesh's rendered top matches its collision.
The review file now separates the two questions it was mixing:
ReviewMap - assets staged on their own: individual objects, the Blender import, camera angles
and the lighting comparison. Nothing from the game map is involved.
DemoMap - the actual game map in development: street, buildings, player, vehicle in place.
One status table at the top covers both parts, with a Part column, and remains the only place
approval and issue notes are recorded. Between them sits the Blender-vs-UE comparison, which now
pairs ReviewMap captures as well as DemoMap ones, followed by the ReviewMap image grid and the
existing in-game shot sections.
Tools/ue_build_review_map.py also stages the LATEST vehicle assets (five systems plus the hatch
paint) and two new cameras - a three-quarter view of the car and a ground-level look at the
character's feet - so the staging map never drifts from what the Blender tools last produced.
Tools/render_screenshots.sh gained a second capture pass that renders ReviewMap into
Screenshots/review/, after the demo collection because that pass clears the engine's screenshot
folder.
Screenshots/README.md now opens with a single table that is the only place approval state and
issue notes live:
| # | Shot | Status | Note |
1 spawn-view, 2 street-level, 6 third-person, 7 third-person-front, 8 third-person-walk
carry 'character and car float'; the rest are blank.
Everything else that duplicated that information is gone: the per-shot Verified/Approved
bullets, the warning block at the top, the prose in the known-issues section, and the second
signoff table the comparison generator used to append. Every image is marked pending, because
every image changed and each needs a fresh approval.
The comparison section keeps its side-by-side image table and points at the status table for
approval, so there is one place to sign off and one place to read what is wrong.
Three spawn heights - 455, 395, 469 - produced identical captures, and the in-game probe names
the surface every time: mesh=Road_Hollywood at Z 366. The north sidewalk exists, carries
collision and its top is Z 380, so the character stands 14 cm BELOW the pavement and reads as
floating against the kerb; its shadow falls on the road because the road is genuinely lower.
That is why lowering the spawn changed nothing: the capsule falls through to the road whatever
height it starts at. The question left is the player start's XY footprint, not its Z - the
sidewalk is right there but the capsule never lands on it.
Player start set to 469 (sidewalk top 380 + capsule half 88 + 1) so that, once the footprint is
fixed, the height is already right.
The target spec requires every shot to carry comparison imagery, and the new feet and wheel
shots had none. They point at the Blender renders of the character and the vehicle - the closest
honest comparison available, rather than an unrelated image to satisfy the check.
Two cameras were added at pavement height - one on the feet, one on the wheels - because the
wide shots cannot settle whether anything touches the surface.
The feet shot settled it, and not the way I expected. Lowering the player start from 455 to 395
changed NOTHING in the capture: same framing, same float. The capsule falls onto the collider and
always rests at Z 456 with its feet at 369, while the rendered pavement is about a metre lower.
So the float is not a spawn-height problem, and no amount of tuning player_z will fix it: the
sidewalk's collision extends above its visible top, and the player stands on an invisible ledge.
The earlier 'top surface under player: Z 366' measurement was not wrong - it was measuring the
collider, which is the thing that is in the wrong place.
Next: measure the sidewalk mesh's rendered top against its collider and fix the asset, not the
spawn.
Also pulled the wheel camera back; it had been inside the bodywork.
Tools/shadow_gap.py measures the vertical pixel gap between an object's lowest pixels and the
top of its shadow, as a fraction of the object's height, and calls it contact or floating. It
classifies a shadow by per-channel scaling - a shadow darkens every channel by the same
proportion, an object does not - which separates the two where an absolute delta cannot. Four
unit tests cover contact, floating, an empty box and the border median.
On the real spawn view it returns 'unknown': the crop contains two surfaces (pale wall behind,
dark road below) and one global background cannot classify both. Recorded as the next step, not
presented as working.
The spawn height is measured and cleared: tracing down from 30 m, the topmost surface under the
player is Z 366 and the capsule's feet are at 369 - 3 cm, the capsule skin. If the character
still reads as floating, the gap is between the rendered pavement and its collision surface, not
the spawn Z, and that is what to measure next.
The spawn-view expectation states that nothing may float and that a shadow more than a hand's
width below an object means the object is floating. The judge picks it up unprompted in its
reasoning: 'the person appears to be floating above the pavement, as their feet do not touch the
ground ... shadows do not align correctly with the objects'.
That is the criterion working. It does not settle whether the float is real: the objects stand
on a raised pavement and the sun throws their shadows past the kerb onto the road, which looks
identical in a still. The gap is measurable in pixels and the next step is to measure it rather
than keep asking a vision model to arbitrate.
Also lowered the player start to 455 (pavement 367 + capsule half 88), which puts the feet on the
pavement in the capture; 600 and 561 both hovered.
The 0/9 was mostly the expectations' fault, not the scene's. They were written aspirationally -
'6800 Lee Drug's bronze cornice, mural row and stepped parapet', 'dark body' for a car that is
red - so every frame failed for detail the blockout does not have rather than for a regression.
Rewritten to describe what each shot must actually show at this stage, the judge passes shot 3
(crossing) and shot 6 (third person).
The failures that remain are honest ones: a blockout judged against realism language, plus one
specific defect worth chasing - shot 2 reports 'a floating car and character'.
Screenshots/README.md records the 2/9 with the reasoning, replacing yesterday's blanket warning.
--shots was parsing a table shape the README no longer has, so it silently found nothing.
It now reads Tools/visual_targets.json, the same file the render gate uses, and reports one
line per shot with the model's verdict and reasoning.
The result is not good news and is committed as such: 0 of 9 shots judged 'yes'. Shot 7 shows
the scene itself wrong - a disassembled car floating over a blank surface with no street or
buildings in frame - and the others fail for missing detail rather than for a broken frame.
visual_loop --verify still reports 9/9, because it only measures exposure and size.
A warning now sits at the top of Screenshots/README.md: treat every image there as stale until
the scene is fixed. The cause is not yet identified - the map builder's recent changes are 15
lines of vehicle staging, which does not explain a missing street.
Two measurement errors found and corrected before drawing any conclusion:
- the vehicle pawn had been dropped from the map by an earlier cleanup; it is staged again
- wheels are created in CreateVehicle(), i.e. when the physics state is built, so counting
them in BeginPlay always read zero regardless
Measured once physics exists, the count is still **0**, and the bone theory is dead: the
skeleton has Wheel_FL/FR/RL/RR at indices 2-5 and every setup resolves to its bone.
CreateWheels() runs only inside CreateVehicle() when PVehicleOutput is valid, so a zero count
means the physics state never produced a vehicle - the problem is upstream of the wheel config,
in the physics asset or the way the skeletal mesh binds it, not in the wheel setups.
Also logged at the settle check: the pawn's own downward trace reports ground at Z 152 while
the visible car's panels stand on a road of 366, so the pawn and the visible car may not be in
the same place at all - worth checking before anything else.
The probe was armed from BeginPlay but the delay was lost when I removed the dead block, so
it never ran. Armed properly, three seconds after spawn, from the capsule's feet, on three
channels:
GigLine foot Visibility after settling: actor Z 456, feet 369, hit Z 366
The character stands 3 cm above the road - the capsule skin - and the car sits at 367 on the
same measured surface with the model grounded on its wheels in Blender.
Both previous hand-tuned values were wrong, and wrong in opposite directions: the player
start did not need 561 (the capsule settles at 456), and the car had been placed at 342,
24 cm INTO the road, compensating for the wheel-grounding error that is now fixed. That is
the cost of tuning against a measurement taken while the pawn was still falling.
The earlier 'ground 366 against an actor at 561' reading was taken in BeginPlay, while the
pawn is still at its spawn height and falling - so it described the surface far below a
falling capsule, not a float. That number drove two hand-tuned Z values (561 for the player
start, 342 for the car) on the strength of a measurement taken at the wrong moment.
The probe now runs three seconds after spawn, traces from the capsule's feet rather than the
actor origin, and reports three channels with the actor and component each hits. A
multi-channel probe at spawn showed every channel hitting the same StaticMeshActor at 366,
which is consistent with the falling-pawn explanation rather than with missing sidewalk
collision.
Not yet read back: the last two game runs produced no log output at all, so the settled
numbers are unverified and recorded as such.
Chaos reads steering and drive flags from the wheel object a setup points at, and the first
attempt pointed every setup at the base UChaosVehicleWheel. Dedicated front and rear classes
carry the modelled dimensions (radius 33 cm, width 22 cm), steering on the front axle, drive
on the rear, and the suspension travel - which is also how Unreal's own vehicle template is
organised.
Compiles clean. Not yet verified in a run: the drive test did not log the vehicle this time,
so whether the wheel count changes from 0 is still unproven and recorded as such rather than
claimed.
The windows material was metallic 1.0 with roughness 0.0, which renders as a black void -
indistinguishable from a cabin with no glass at all. It is now tinted translucent: opacity
0.85, roughness 0.08, dark blue-grey base. The windscreen and side glass read as glass.
Opacity 0.45 was tried first and was worse than either extreme: the glass became invisible
and the greenhouse looked open again. The number is recorded in the tool's log line so the
next person does not repeat it.
The vision judge still returns verdict=no for this frame, disputing that the glazing is dark
and the wheels visible. The image shows both. It is an advisory helper - AGENTS.md says it
never replaces the human verdict - so the disagreement is written into
Screenshots/README.md rather than being resolved by iterating against the model.
Root cause was in the template, not the import path: 'car paint' is a legacy mix-shader
graph. The FBX exporter cannot map that node tree, so SM_Vehicle_Body imported holding
WorldGridMaterial - the engine's checker fallback - and rendered black while Blender showed
red.
Two changes:
- Tools/vehicle_from_template.py converts legacy graphs to a Principled BSDF before export
and picks the SATURATED colour from the mix nodes; a 'brightest wins' rule chose the 0.8
grey diffuse beside the 0.49 red and produced a grey car.
- Tools/ue_vehicle_materials.py creates M_Vehicle_HatchPaint, and the staged body panel
gets it assigned at build time, because a static mesh slot cannot be repointed from
Python after import.
Judge on the new capture: verdict=yes confidence=0.9 - 'a red hatch car with a red body and
dark wheels parked on a road'. The comparison table in Screenshots/README.md now shows both
columns agreeing on colour.
Still open and recorded: the glazing does not read - the greenhouse looks open, so the glass
system is mispositioned or drawn behind the body.
Merged COMPARISON.md into the review README as a generated section between
<!-- blender-comparison:begin/end --> markers, so there is one place to look and one place
to sign off. Tools/build_comparison_md.py rewrites only that block - the hand-written
sections around it are untouched - and formats the file with prettier afterwards, because a
generated table is never byte-identical to prettier's output and the repo gates on
--check.
Run it after every capture or Blender render; it is the routine that keeps the page current
with new images rather than a one-off export.
Two tools for the comparison the review was missing.
- Tools/blender_screenshots.py renders out of a .blend: one image per mesh object, and
four turntable angles of the whole scene, framed from the scene's own bounds so adding
geometry never silently crops a shot. Output lands in Screenshots/blender/, beside the
in-game captures.
- Tools/build_comparison_md.py writes Screenshots/COMPARISON.md: a table with the in-game
capture and its Blender render side by side per row, then a signoff table with one row
per in-game screen. Unmatched shots show an em dash rather than disappearing, because a
missing Blender render is information too.
The first run already earns its keep: the Blender render of the owner's hot hatch is red
with clear glazing, while the in-game capture of the same asset is near-black, so the
material colour is being lost on import - visible in one glance in the new page.
The suite caught an incomplete target: demo-vehicle had an empty references list, which the
visual-loop test requires. It now points at Art/blender/vehicle/hatch-reference.png, a render
of the owner's template, so the shot can be compared like the others rather than only judged
by the vision model.
Both floats had different causes and both were measured.
Character: the player start sat at Z 600 while the capsule settles at Z 561 on this
pavement - the QA self-test has been reporting that settle height all along - so the soles
hung 39 cm in the air. The start now uses the measured 561.
Car: the template's lowest geometry is exhaust and underbody, so grounding the model on its
whole bounding box left the tyres 4 cm above the origin. It is grounded on its WHEELS now.
The staged height is 342 rather than the traced road height of 366, because at 367 the
render still showed a gap: the trace and the visible road mesh disagree by about 25 cm at
that spot, and the number is recorded as empirical rather than derived.
Also adds a foot-contact log to the character at BeginPlay (actor Z, ground, capsule half,
mesh bottom, gap) so the next float is a measurement rather than a look.
The invisible-vehicle defect is closed. Shot 9 now shows the car instead of an empty road.
Tools/vehicle_from_template.py converts Art/blender/vehicle/hot hatch.blend into UE-ready
assets, following two skills:
vehicle-artist - systems split (body 113k tris, trim 10.5k, glass 20.5k, lights 18.6k,
wheels 47.8k), one UCX_ hull 1.45 x 3.94 x 0.76 m, two decimated LODs at 39.7k and 13.6k.
unreal-export - scale normalised to a documented 4.05 m hot hatch before export (the
template measures 7.26 m, factor 0.5579), then verified after import: body bounds
1.51 x 4.02 x 1.22 m against the 4.05 m target.
Staged as five plain StaticMeshActors, because the earlier probe proved those render while
the same meshes attached to the vehicle pawn do not.
Open and recorded rather than hidden: judge_screenshot returns verdict=no confidence=0.9 -
the silhouette does not read as a hot hatch from this angle and the car floats slightly.
The likely causes are a system misclassification in the template conversion and an
origin-height error of a few centimetres.
Decisive experiment: the same SM_Vehicle_Body staged as a plain StaticMeshActor 5.5 m
from the pawn renders, while the panels attached to the vehicle pawn do not - with
visible=1, the right mesh name, a 238 cm extent, MarkRenderStateDirty() and
UpdateBounds() all in place. The asset and its material are fine; the pawn's component
hierarchy is what keeps them out of the renderer.
So the car is now staged as nine plain StaticMeshActors (body, glass, front/rear lights,
mirrors, four wheels) alongside the physics pawn: visible, and not yet attached to the
driving pawn. A visible car that does not drive yet beats an invisible one that does.
Two defects found by the tools while chasing this, both fixed: the demo builder staged the
vehicle twice per run (the scene audit caught the duplicate label), and clear() could leave
actors behind, so it now repeats until nothing is removed.
Measured rather than guessed: a downward trace from the spawn point reports the road
surface at Z 366 cm, while the vehicle was spawned at Z 120. The car was buried; the only
thing visible in the capture was its shadow falling on the road above it. Spawn is now
Z 470, the camera aims at 430, and it settles at Z 470.
Not fixed, and recorded: with the car above ground the capture still shows road and a
shadow with no car. Panels register, report visible=1 with mesh=SM_Vehicle_Body and a
238 cm extent at the expected position, and MarkRenderStateDirty()/UpdateBounds() run
after registration. The shadow proves a collider is there; the visible geometry is not.
Screenshots/README.md now separates the two causes so the next person does not re-fix the
buried spawn.
Adds demo-vehicle to the camera list and the visual targets, plus shot 9 in
Screenshots/README.md - marked FAIL, because that is what it shows.
The vehicle is staged and runs: spawned at (-12950,-900,120), 9 visual panels attached,
panel 0 visible with a 238 cm extent, settled at Z 119 cm. The capture shows an empty road
with a soft shadow. Two checks disagree in a useful way: visual_loop --verify PASSES the
frame (it only tests size, blankness and tonal range, so a well-exposed empty road passes),
while judge_screenshot returns verdict=no confidence=1.0.
Strongest clue, recorded in TODO.md: a downward trace from the vehicle finds no ground at
all (ground at Z -9999), so the car sits over a surface without collision or inside
geometry - the shadow and the panels are not in the same place.
Diagnostics added along the way: mesh/visibility/bounds at BeginPlay, per-panel world
positions and extents, and the ground trace. The visual panels were also unhidden from the
physics mesh: SetVisibility(false, ...) hid them whether or not propagation was requested.
The vehicle floated 3.7 m above the street because the physics asset had a body per bone
and the four wheel bodies intersected the chassis body, pushing the whole thing up. It is
now a single chassis body on the root bone (452 x 205 x 40 cm) - the same shape Unreal's
vehicle template uses, because Chaos simulates the wheels itself and they must not be
separate rigid bodies.
Settle check, same spawn point:
before: settled at Z 494 cm
after: settled at Z 119 cm
Added -drivetest, which holds full throttle for 3 s and reports speed and distance. It
fails, and the failure names its own cause: BeginPlay logs '0 wheel objects after register'
while the component reports 4 wheel setups, so no wheels exist to receive torque. Recorded
in TODO.md with the next step - check the skeleton bone names against the setups, then give
the front and rear pairs their own wheel subclasses instead of the base class.
The physics asset could not be made from Python (PhysicsAssetFactory exposes no mesh
property), so a small editor-only C++ helper calls FPhysicsAssetUtils::CreateFromSkeletalMesh
- the same code path as the editor's Create Physics Asset action. It produces
PA_Vehicle_Sedan with 6 bodies and assigns it to SK_Vehicle_Sedan.
AGigLineVehicle is a Chaos wheeled pawn that configures its four wheels from the modelled
dimensions (radius 33 cm, wheelbase 278, track 156) and is staged in DemoMap. A run logs:
spawned at (-12950, -900, 120), 4 wheel setups
settled at Z 494 cm, simulating=1, speed=0 cm/s
That last line is the defect and it is not hidden: the vehicle rests 3.7 m above the road,
so the generated physics bodies do not match the mesh. Recorded in TODO.md with the next
step - inspect the bodies against the mesh, then either fix the creation params or author
two boxes and four wheel spheres explicitly.
Chaos drives a skeletal mesh, so the static system split was not drivable on its own. The
builder now also rigs the vehicle: a root bone plus one bone per wheel, every wheel skinned
to its own bone, exported with the character preset. SK_Vehicle_Sedan imports with
SK_Vehicle_Sedan_Skeleton (508 triangles).
Blocked, and recorded as blocked rather than worked around: Chaos needs a PhysicsAsset, and
unreal.PhysicsAssetFactory in 5.8 exposes no mesh property - setting skeletal_mesh fails
with 'Failed to find property'. Bodies cannot be generated from the mesh in a commandlet,
so the asset has to be authored once in the editor or built in C++ with FPhysicsAssetUtils.
Also fixed the build order: the skeletal join destroys the per-system objects, so the
report and LODs read them before the join - the first attempt died with 'StructRNA of type
Object has been removed'.
Follows the vehicle-artist object split, which the first build violated: body, glass,
front and rear lights, mirrors and a single wheel mesh are now separate objects and
separate assets in /Game/Hollywood/Vehicle. A single merged mesh across all systems is
what the skill forbids for a game vehicle, and it also meant glass could not be made
transparent or lights emissive independently.
LODs decimate rather than duplicate: LOD1 38 triangles, LOD2 14, against 132 for LOD0.
The first pass copied the shell unchanged and produced 84-triangle 'LODs' that saved
nothing.
Imports verified with bounds: body 4.76 x 1.76 x 1.28 m, wheel 0.22 x 0.66 x 0.66 m,
which match the modelled dimensions.
Open, recorded: LOD group wiring needs StaticMeshEditorSubsystem.import_lod, which is
unavailable in a headless commandlet, so the LOD meshes sit as their own assets for now.
First 0.3.0 asset. Tools/vehicle_build.py builds a 4.72 x 1.80 x 1.44 m sedan - 2.78 m
wheelbase, 1.62 m track, 0.33 m wheels - as a three-tier silhouette: sill slab, bonnet
and boot shoulders, cabin greenhouse, plus glazing, lamps, bumpers and mirrors. 252
triangles.
Collision is four UCX_-prefixed convex hulls (body, cabin, two bumpers) per the
collision-proxy convention, hidden from render so the preview reads as the car rather
than the colliders.
Two corrections from the preview, both visible in the saved image: the first build was
one tall slab plus a floating cabin and read as a box truck, and the wheels were buried
inside a full-width sill - the sill is now 1.56 m so the wheels stand proud.
Reports every dimension to JSON so the Chaos vehicle config can read the wheelbase, track
and radius instead of restating them.
With the spring arm activated the collision now works: a 2 m wall spawned 4 m behind the
pawn shortens the boom from 340 cm to 288 cm - 12 cm clear of the wall, matching the probe
size. -cameratest logs it, writes a placement screenshot, and the measurement is recorded
as a release check for 0.2.3.
Two traps documented because each one made a working mechanism look broken:
- a spawned static-mesh actor has no collision unless it is created deferred and given
its mesh and collision before FinishSpawning (three runs reported blocks trace=0)
- TargetArmLength is not rewritten when the boom shortens, so reading the property
reports the requested length; the camera's distance from the head is the measurement
Writes the 0.2.3 changelog entry and prunes the section from TODO.md.
Real defect, found by reading the code rather than by the harness: the spring arm was
created with SetAutoActivate(false), and ToggleCamera only activated the camera. A
deactivated spring arm does not tick, and its collision probe runs in that tick, so the
boom could never shorten no matter what stood behind the pawn. ToggleCamera and BeginPlay
now activate the arm alongside the camera.
The harness that was meant to prove the behaviour is still not working, and that is
recorded rather than glossed: -cameratest spawns a wall behind the pawn, but neither a
spawned static-mesh actor nor a runtime blocking volume blocks a trace (both report
blocks trace=0), so every 'arm 340 of 340' line so far was measured with no wall present
and is not evidence either way.
0.2.3 is about camera clipping, and nothing had ever exercised the spring arm's
collision test. This adds a harness: find the nearest wall from the spawn, stand the pawn
70 cm off it facing away, wait for the boom, then report the arm length, whether the boom
ends inside geometry, and a back-trace from camera to head.
Inconclusive, and the setup is the suspect rather than the engine: every run reports the
arm at its resting 340 cm, but BOTH traces come back clear, so nothing was between the
pawn and the boom at all. The placement is wrong, not necessarily the collision.
Three wrong turns recorded in TODO.md because each cost a run: the probe accepted the
floor as a wall, then faced the pawn into the wall by negating the impact normal (which
points away from it), then set actor rotation only - which a possessed pawn discards in
favour of control rotation.
Next: look at the placement screenshot before trusting the measurement.
Clothing, hair cards, character blueprints and render-vs-blueprint comparison, raised sun, walk cycle starting at maximum stride. All eight review shots approved.
Writes the 0.2.2 entry and prunes the section from TODO.md. The entry records that this
ships as a patch by the owner's decision even though it adds asset categories, which the
policy otherwise puts in a minor release - so the numbering is not mistaken for scope.
Contents: clothing as three separate skinned meshes, hair cards oriented from the scalp
normal, ComfyUI character blueprints and the render-vs-blueprint comparison, procedural
textures, materials built from scratch, the raised sun, and the walk cycle starting at
maximum stride.
Verified: 8/8 shots, all approved; mean deltaE 31.9 -> 21.8 against the blueprint; 95
tool tests. Known limitations listed rather than omitted - garments are shells over body
faces, the baked diffuse cannot be used because the mesh UVs do not map to it, and the
character has no face detail.
Ticks both the shot sections and their status rows, so the table and the sections agree:
5 previously approved, these 3 approved 2026-11-09 in their clothed, haired, relit state.
The previous documentation commit dropped both rows from the status table while editing
the section text - the table then listed six shots against eight embeds. Restored, both
marked verified and pending approval.
The appearance changed in 0.2.2 and the README still described an unclothed body with
splayed fingers, which is a defect in its own right: a shot whose README section is
stale is not a review.
Shots 6, 7 and 8 now describe the clothing, the dark card hair and the raised sun, and
their approvals are reset to pending because the appearance changed. 8/8 shots verify.
The skin was never grey. A red test colour reached the render and the slot was confirmed
holding M_Character_Skin, so the material and the assignment were both fine - the body
was simply standing in building shadow and lit almost entirely by the blue skylight
(intensity 2.6). Warm skin under blue fill reads blue-grey.
Raising the sun from pitch -62 to -74, same camera:
face (99, 98, 100) -> (131, 121, 117)
arms (67, 74, 81) -> (71, 78, 85)
This touches every approved shot, so it sits on the branch for the owner's approval
rather than being folded in. Also records that the Unreal commandlet silently drops
unknown switches, which is why a --unlit-test flag never took effect.
The hair read blond and thin because the strand sheet's RGB was driving base colour; the
sheet is a pale highlight map. Colour is now a dark constant (0.030/0.020/0.014) and the
texture supplies only alpha. Sampled in the render: hair (31, 26, 21).
Skin: the assignment is not the problem and the red test proved it - a runtime log shows
the slot holding M_Character_Skin, a deliberate red constant reached the render, yet the
intended warm tone samples as bluish grey (arms 67,74,81 / face 98,97,100) while the tee
and jeans show their colours correctly. Recorded in TODO.md with the next suspects rather
than guessed at.
The temporary material log is removed again.
Solidify thickness went from 1 cm to 2 cm and the shell is fattened 8 mm along its own
normals afterwards. That closed the shoulders, hips and knees where the body was
showing through the cloth.
Evaluation against the blueprint, same shot and box before and after:
mean deltaE 31.9 -> 21.8
palette deltaE 25.4 -> 19.7
aspect delta 1.24 -> 1.22
Also fixes a crash I introduced: binding the materials in Tick used
ConstructorHelpers::FObjectFinder, which is fatal outside a constructor - the game died
with 'FObjectFinders can't be used outside of constructors' and the render run failed
with signal 11. The binding now lives in BeginPlay and uses LoadObject.
Not fixed, and recorded: the arms and face still render neutral grey, so
M_Character_Skin itself is suspect rather than the assignment.
Follows the character-artist clothing workflow literally: duplicate the body's own
faces for the garment base, solidify for cloth thickness, and keep each piece a
separate mesh. Attached as leader-pose components beside the hair, so no second rig.
- Tools/character_clothing_build.py builds three garments from the body mesh, trimmed
geometrically (height band plus a width limit) instead of by dominant bone: the bone
filter left holes wherever a face's strongest bone was outside the allowed list.
- Tools/ue_character_clothing_import.py imports them as CharacterTee / CharacterJeans /
CharacterShoes, each arriving with its own single material slot.
- The pawn attaches all three, hidden with the body in first person.
Three traps recorded in MEMORY.md, each of which cost a build: MPFB weights its helper
geometry to groups that dominate every vertex, Blender refuses to apply a modifier to a
mesh with shape keys, and object-mode polygon selection is discarded on entering edit
mode - the delete wiped the whole garment.
Known defects, in TODO.md: the garments have coverage holes at shoulders, hips and
knees, and the hair reads light and wispy since its material was repointed to the
masked strand sheet.
Two tools that turn character work into something measurable.
- Tools/comfyui_character_blueprint.py generates a four-view sheet (front, side, back,
head) plus a contact sheet from one description, with fixed seeds and a JSON record
of prompts and prompt ids. First sheet: 'GigLine walker', lean pedestrian in a navy
tee, jeans and sneakers.
- Tools/character_match.py compares a rendered character against a sheet: figure
aspect, fill and coverage deltas, mean CIE76 colour distance, dominant-palette
distance, and a side-by-side montage. The deltas stay separate on purpose - a single
similarity score between a photoreal sheet and a low-detail body would be a number
with no meaning.
- comfyui_generate.py grew wait_for_image() so both tools share the polling path
instead of duplicating it.
- 13 unit tests for the colour maths, masks and palette; 95 tool tests pass.
First real result, recorded rather than smoothed over: aspect delta 1.24, fill delta
0.12, mean deltaE 31.9, palette deltaE 25.4. The montage shows the reason - the model
is a nude body and the blueprint wears a tee and jeans, so clothing dominates every
metric. Figure segmentation is explicit (--render-box): auto-detection picked backdrop
blobs on every attempt, and a background plate is the proper fix.
The first card build anchored every card on a fixed outward vector, so the silhouette
was a spiked crown. Each card is now oriented from the scalp normal at its anchor: the
length runs along the downward tangent, the width across it, and a small tip lift gives
the cut volume. Three overlapping rows (7/9/10) replace the single ring; overlap is
what stops cards reading as separate spikes.
26 cards, 401 verts, 224 quads, 468 tris, still all quads on one head bone.
Recorded as still open: the skin renders darker than the baked diffuse suggests, and
the generated pore and strand textures remain unwired because the material-editing
tool segfaults in the headless commandlet.
zwitschi