Tools/hero_iterate.sh runs the whole chain - chmod the Blender files, build, import, render, judge, plate -
and fails loudly at each step with its log under /tmp/gigline. Tools/hero_compare.py builds the side-by-side
plate (reference | rendered, one height, labelled); two are committed for review.
This pass: the stone is warmer in Blender (0.66/0.60/0.48 against the near-white blockout) and the banners are
1.35 x 6.2 m hung from 7.2 m, matching the reference proportion instead of the 1.55 x 5.4 that sat too low and
too fat.
Iteration 1 judge verdict, confidence 0.9: lacks warm sandstone, lacks fluted column detail, banners wrong,
no doorways, no inscription or medallions. Checked against the plate, two of those are wrong (120 flute
strips exist and cast shadows; three 1.2 m deep doorways with steps exist and read black) and three are real.
The split is recorded in TODO.md with the next action for each - the important one being that the stone colour
must change in the UE material (ue_hero_facade_import.py), not in the Blender material, which the render does
not use.
Art/reference/hero-masonic/ (15 images, git-ignored) replaces the single Wikimedia photo as the source of
truth. Two front elevations drive this pass: 02-masonictemple01.jpg, a clean street-level frontal, and
06-el-capitan-theater-frontal-fachade.jpg; 05-hollywoodmasonictemple-1922.jpg records the original masonry.
Changes:
- the blank Hero_Stylobate_LintelBand across the portals is removed - the reference has open doorways with
steps, and they now read as three dark openings with banners above them;
- rustication(): five ashlar courses from the pavement to the portal heads, 4 cm joints proud of the wall;
- balustrade(): bottom rail, top rail and 38 balusters along the roof edge, where the reference shows a
cresting and railing.
Still missing against the same references, and recorded: warm sandstone instead of flat pale stone, lattice
grilles in the window bays, the carved inscription, and medallions that do not read at distance.
The blend is read-only after a checkout - chmod u+w first or the save fails silently and the FBX is never
written, which happened once here.
Rows 4-6 re-rendered and pending review.
The three hero captures showed a plain block with six columns because every applied detail sat BEHIND the
wall's front face, inside the solid mass:
Hero_Banner_1 y -1.08..-1.02 (55 cm inside)
Hero_Portal_1 y -2.35..-1.15 (2 m inside)
Hero_Window_1_1 y -0.60..-0.52 (2 cm inside)
The colonnade, cornice and dentils happened to protrude, which is exactly what the shots showed.
The depth is now stated once, in hero_facade_build.py: FRONT_Y is the wall's front face and
seat_on_front() moves every applied part until its street-facing face sits at FRONT_Y + offset - 8 cm for
banners and jambs, 5 cm for entablature and cornice, 3 cm for window panes, 4 cm for mullions, 10 cm for
portal signs. It reports what it moved, 99 parts.
After re-export, re-import and re-render the front elevation now shows the three red banners, the two
window bands, the dentil course and the portals. What is still missing against the reference: rusticated
banding on the stone, lettering on the motto band, grilles in the windows, a balustrade on the parapet, and
the blank lintel band across the portals that the reference does not have.
Rows 4, 5 and 6 are back to pending for review because the images changed.
The portal detail shot failed for a modelling reason, not a camera reason: the
doors were 0.1 m panels on a solid plinth, so they read as shading. The plinth is
now four piers plus a lintel band, with a 1.2 m reveal, stone jambs and lintels
standing 0.10 m proud and three mullions per opening. review-06 frames them from
8 m at eye height.
Two defects fixed while doing it: the jamb boxes hung 0.15 m below the pavement,
so the facade imported with min Z -15 cm; and a rebuild run against a read-only
.blend silently skipped the save, which is why screenshots kept showing the old
geometry.
Tools/sibling_asset_audit.py reads the sibling security-game project's prop
library straight from the GLB headers: 20 street props, 11.8k triangles, every
one with a Blender source. The 50 .blend sources are copied to
Art/props/blender_src/ with a manifest; nothing is imported into Unreal yet. Its
building meshes are deliberately not taken - they are Godot GLBs built around a
29.6 m facade that this project measured at 25.75 m.
The facade proportions were wrong against the photograph: 5.7 m of blank wall
above the capitals. Entablature is now 3.4 m, parapet 2.2 m, with architrave and
cornice bands and square pedestals, so the elevation reads as layered stone.
Tools/hero_facade_build.py builds the north elevation parametrically and writes
a JSON report naming the evidence behind every part: the 25.75 m frontage and
14.5 m height are measured, the 4.96 m column bay comes from the sibling notes
and matches that frontage, the three portal flights follow the photographs (five
risers, overturning the inherited eight-step, 12 m wide claim), and the rest is
labelled assumption.
Tools/ue_hero_facade_import.py imports it with the ue_metric_v1 preset
(2604 x 1257 x 1450 cm, 1892 tris, 4 materials) and places it on the measured
building line of /Game/Hollywood/DemoMap.
Two new review shots at review-04 and review-05, both pending approval. Camera
placement cost four renders: the first two sat inside the facade body, and the
frontage faces Unreal -Y, so a camera has to stand at Y < -1450 cm, not north of
the building line in project terms.
zwitschi