zwitschi
03ef4dc945
Art/reference/hero-masonic/ (15 images, git-ignored) replaces the single Wikimedia photo as the source of truth. Two front elevations drive this pass: 02-masonictemple01.jpg, a clean street-level frontal, and 06-el-capitan-theater-frontal-fachade.jpg; 05-hollywoodmasonictemple-1922.jpg records the original masonry. Changes: - the blank Hero_Stylobate_LintelBand across the portals is removed - the reference has open doorways with steps, and they now read as three dark openings with banners above them; - rustication(): five ashlar courses from the pavement to the portal heads, 4 cm joints proud of the wall; - balustrade(): bottom rail, top rail and 38 balusters along the roof edge, where the reference shows a cresting and railing. Still missing against the same references, and recorded: warm sandstone instead of flat pale stone, lattice grilles in the window bays, the carved inscription, and medallions that do not read at distance. The blend is read-only after a checkout - chmod u+w first or the save fails silently and the FBX is never written, which happened once here. Rows 4-6 re-rendered and pending review.
501 lines
25 KiB
Python
501 lines
25 KiB
Python
"""Parametric hero façade: 6840 Hollywood Blvd / El Capitan Entertainment Centre.
|
|
|
|
Builds the north elevation in the project frame (X east, Y north, Z up, metres,
|
|
origin Hollywood x Highland) and exports it with the named FBX preset
|
|
`ue_metric_v1`, so it imports into Unreal at 1 m = 100 uu.
|
|
|
|
blender -b --factory-startup --python Tools/hero_facade_build.py -- \
|
|
--out /tmp/gigline/hero-facade.fbx \
|
|
--save-blend Art/blender/hero/hero-facade-2026-11-07.blend \
|
|
--report Art/blender/hero/hero-facade-2026-11-07.json
|
|
|
|
Every dimension traces to a recorded measurement or a named assumption; the
|
|
report writes both, so a later pass can see what was evidence and what was
|
|
invented:
|
|
|
|
width 25.75 m measured, OSM way 424024147 north edge
|
|
height 14.50 m tag `height` on the same way
|
|
6 columns, 4.96 m sibling venue notes, cross-checked against the 25.75 m
|
|
frontage (5 bays + one column = 25.70 m)
|
|
three portals photographs: three separate openings, each with its own
|
|
short flight, not one 12 m grand stair
|
|
everything else assumption, listed in the report
|
|
|
|
Quieter choices are deliberate: a blockout for the demo, not a scanned facade.
|
|
Detail that the photographs do not resolve (moulding profiles, window rhythm)
|
|
is left abstract rather than invented in fine detail.
|
|
"""
|
|
|
|
import argparse
|
|
import json
|
|
import math
|
|
import os
|
|
import sys
|
|
|
|
import bpy
|
|
sys.path.insert(0, os.path.dirname(os.path.abspath(__file__)))
|
|
import fbx_export_preset as fbx_preset # noqa: E402
|
|
|
|
|
|
# --- measured / derived ------------------------------------------------------
|
|
FRONTAGE_W = 25.75
|
|
BODY_D = 12.0 # street-side mass only; the building runs 54.9 m deep
|
|
HEIGHT = 14.5
|
|
COLUMN_COUNT = 6
|
|
COLUMN_BAY = 4.96
|
|
FRONTAGE_Y = 0.0 # front plane sits at the building line of the block frame
|
|
|
|
# --- assumptions -------------------------------------------------------------
|
|
# Calibrated against the 2009 façade photograph: the entablature starts a little
|
|
# over half the total height, and the parapet carries the motto at about three
|
|
# quarters. The first pass had the enframed wall carrying 5.7 m of blank stone
|
|
# above the capitals, which read as a warehouse rather than a temple.
|
|
PEDESTAL_H = 1.45 # column pedestal top; entrance platform sits on it
|
|
COLUMN_D = 0.95 # Ionic shaft diameter at the base
|
|
CAPITAL_H = 0.95
|
|
ENTABLATURE_H = 3.00 # band between the capitals and the motto panel
|
|
# 3.40 -> 3.00 on 2026-11-09: the photographs put the
|
|
# colonnade at 50-60 % of the 14.5 m elevation, and our
|
|
# 3.40/2.20 entablature+parapet left it at 47.6 %. Thinning
|
|
# both lifts the colonnade to 7.70 m = 53.1 %, inside the band.
|
|
PARAPET_H = 1.80 # motto panel and cornice above the entablature (see above)
|
|
PORTAL_W = 3.10 # each of the three door openings
|
|
PORTAL_H = 3.40
|
|
STEP_TREAD = 0.34
|
|
STEP_RISE = 0.15
|
|
STEP_WIDTH = 3.60
|
|
|
|
|
|
def cube(name, x, y, z, dx, dy, dz, material=None):
|
|
bpy.ops.mesh.primitive_cube_add(size=1.0, location=(x, y, z))
|
|
obj = bpy.context.active_object
|
|
obj.name = name
|
|
obj.scale = (dx, dy, dz)
|
|
bpy.ops.object.transform_apply(location=False, rotation=False, scale=True)
|
|
if material:
|
|
obj.data.materials.append(material)
|
|
return obj
|
|
|
|
|
|
def cylinder(name, x, y, z0, z1, radius, material, vertices=24, smooth=True):
|
|
bpy.ops.mesh.primitive_cylinder_add(
|
|
vertices=vertices,
|
|
radius=radius,
|
|
depth=(z1 - z0),
|
|
location=(x, y, (z0 + z1) / 2.0),
|
|
)
|
|
obj = bpy.context.active_object
|
|
obj.name = name
|
|
if material:
|
|
obj.data.materials.append(material)
|
|
if smooth:
|
|
# Round parts must shade smoothly *around* the axis while keeping the
|
|
# caps creased. Without this the columns read as faceted prisms, and the
|
|
# FBX carries no smoothing groups at all (Unreal warns about it).
|
|
bpy.ops.object.shade_smooth_by_angle(angle=math.radians(35.0))
|
|
return obj
|
|
|
|
|
|
def disc_on_wall(name, x, y, z, radius, thickness, material=None, vertices=24):
|
|
"""A round disc mounted vertically on a wall face.
|
|
|
|
`cylinder()` builds along Z, so a "medallion" made with it is a pancake lying
|
|
flat on top of the parapet rather than a disc on its face — which is what the
|
|
first build did (1.1 m across in Y, 0.02 m thick in Z, sitting at the coping).
|
|
This rotates the cylinder 90 degrees about X so the axis points along Y and
|
|
the disc faces the street.
|
|
"""
|
|
obj = cylinder(name, x, y, z - thickness / 2.0, z + thickness / 2.0,
|
|
radius, material, vertices=vertices)
|
|
obj.rotation_euler = (math.radians(90.0), 0.0, 0.0)
|
|
bpy.ops.object.select_all(action="DESELECT")
|
|
obj.select_set(True)
|
|
bpy.context.view_layer.objects.active = obj
|
|
bpy.ops.object.transform_apply(location=False, rotation=True, scale=True)
|
|
return obj
|
|
|
|
|
|
def make_material(name, rgba, roughness=0.75):
|
|
mat = bpy.data.materials.new(name)
|
|
mat.use_nodes = True
|
|
bsdf = mat.node_tree.nodes.get("Principled BSDF")
|
|
bsdf.inputs["Base Color"].default_value = rgba
|
|
bsdf.inputs["Roughness"].default_value = roughness
|
|
return mat
|
|
|
|
|
|
def build():
|
|
scene = bpy.context.scene
|
|
for obj in list(bpy.data.objects):
|
|
bpy.data.objects.remove(obj, do_unlink=True)
|
|
|
|
stone = make_material("M_Facade_Stone", (0.78, 0.74, 0.66, 1.0), 0.85)
|
|
stone_dark = make_material("M_Facade_StoneShadow", (0.62, 0.59, 0.53, 1.0), 0.85)
|
|
glass = make_material("M_Facade_GlassDark", (0.05, 0.06, 0.07, 1.0), 0.25)
|
|
banner = make_material("M_Facade_Banner", (0.66, 0.06, 0.05, 1.0), 0.9)
|
|
|
|
half_w = FRONTAGE_W / 2.0
|
|
lines = []
|
|
parts = []
|
|
|
|
def note(name, dims, evidence):
|
|
parts.append({"object": name, "dims_m": [round(d, 3) for d in dims], "evidence": evidence})
|
|
lines.append(f"[hero] {name:22} {dims[0]:6.2f} x {dims[1]:6.2f} x {dims[2]:6.2f} m ({evidence})")
|
|
|
|
# --- main mass ---------------------------------------------------------
|
|
# The mass sits behind the colonnade; its front face is the colonnade line.
|
|
# Inset so the entablature (1.5 m deep) and parapet (1.2 m deep) sit inside the
|
|
# measured 25.75 m frontage instead of overhanging it.
|
|
inset = 0.75
|
|
# The wall's front face, and the only Y that matters for what is visible.
|
|
# +Y is the street side: anything with y < FRONT_Y is inside the solid mass and never renders.
|
|
# Hand-typed negative Y values throughout this file put the banners 55 cm, the portals 2 m and
|
|
# the windows 6 cm behind this plane, which is why the captures showed a plain block with six
|
|
# columns. `seat_on_front()` below re-seats every applied detail relative to FRONT_Y, so the
|
|
# depth is stated once instead of guessed at each call site.
|
|
global FRONT_Y
|
|
FRONT_Y = -BODY_D / 2.0 - 0.5 + BODY_D / 2.0 # = -0.5 with the current BODY_D
|
|
cube("Hero_Mass", 0.0, -BODY_D / 2.0 - 0.5, HEIGHT / 2.0, FRONTAGE_W - 2 * inset, BODY_D, HEIGHT, stone_dark)
|
|
note("Hero_Mass", (FRONTAGE_W - 2 * inset, BODY_D, HEIGHT),
|
|
"measured frontage x assumption depth x measured height, inset behind the cornice")
|
|
|
|
# --- stylobate and steps ----------------------------------------------
|
|
# A plinth from the pavement to the pedestal shelf, with three door flights.
|
|
# The stylobate is built later as piers around the three door openings.
|
|
|
|
# --- Ionic colonnade ---------------------------------------------------
|
|
col_xs = []
|
|
span = (COLUMN_COUNT - 1) * COLUMN_BAY
|
|
for i in range(COLUMN_COUNT):
|
|
x = -span / 2.0 + i * COLUMN_BAY
|
|
col_xs.append(x)
|
|
cube(f"Hero_Pedestal_{i + 1}", x, -0.62, PEDESTAL_H + 0.27,
|
|
1.24, 1.24, 0.54, stone)
|
|
# Base moulding: a taller, wider cylinder where the shaft meets the
|
|
# pedestal. Without it the shaft starts straight off a square plinth,
|
|
# which is not how an Ionic base reads in silhouette.
|
|
base_z0 = PEDESTAL_H + 0.55
|
|
base_h = 0.22
|
|
cylinder(f"Hero_ColumnBase_{i + 1}", x, -0.55, base_z0, base_z0 + base_h,
|
|
0.68, stone, vertices=20)
|
|
shaft_z0 = base_z0 + base_h
|
|
cap_z0 = HEIGHT - ENTABLATURE_H - PARAPET_H - CAPITAL_H
|
|
cylinder(f"Hero_Column_{i + 1}", x, -0.55, shaft_z0, cap_z0,
|
|
COLUMN_D / 2.0, stone)
|
|
|
|
# Fluting: 20 shallow grooves around the shaft, as the photographs show on
|
|
# the colonnade. Each flute is a thin cylinder set into the shaft surface;
|
|
# modelling them as grooves would need booleans on 6 columns for detail the
|
|
# eye reads only in silhouette and grazing light, so they are added mass in
|
|
# the *shadow* direction instead — cheap, and it breaks the flat highlight.
|
|
flutes = 20
|
|
flute_r = 0.032
|
|
for f in range(flutes):
|
|
ang = (2.0 * math.pi * f) / flutes
|
|
fx = x + (COLUMN_D / 2.0 - flute_r * 0.4) * math.cos(ang)
|
|
fy = -0.55 + (COLUMN_D / 2.0 - flute_r * 0.4) * math.sin(ang)
|
|
cylinder(f"Hero_Flute_{i + 1}_{f + 1}", fx, fy, shaft_z0 + 0.05,
|
|
cap_z0 - 0.05, flute_r, stone_dark, vertices=6)
|
|
# Capital block, then the square abacus that carries the architrave.
|
|
# The abacus takes the top 0.14 m of the capital zone so the colonnade
|
|
# still ends at HEIGHT - ENTABLATURE_H - PARAPET_H (proportion unchanged).
|
|
abacus_h = 0.14
|
|
cylinder(f"Hero_Capital_{i + 1}", x, -0.55, cap_z0,
|
|
HEIGHT - ENTABLATURE_H - PARAPET_H - abacus_h, 0.62, stone, vertices=16)
|
|
cube(f"Hero_Abacus_{i + 1}", x, -0.55,
|
|
HEIGHT - ENTABLATURE_H - PARAPET_H - abacus_h / 2.0,
|
|
1.30, 1.30, abacus_h, stone)
|
|
note("Hero_Column_x6", (COLUMN_D, COLUMN_D, HEIGHT - ENTABLATURE_H - PARAPET_H - PEDESTAL_H),
|
|
f"6 columns at {COLUMN_BAY} m centres (sibling notes x measured frontage)")
|
|
note("Hero_Flute_x120", (0.064, 0.064, cap_z0 - shaft_z0),
|
|
"photographs: fluted shafts; 20 grooves per column modelled as shallow "
|
|
"cylinders in the shadow tone rather than boolean cut grooves")
|
|
note("Hero_ColumnBase_x6", (1.36, 1.36, 0.22),
|
|
"assumption: Ionic base moulding; photographs show a wider base at the shaft foot")
|
|
note("Hero_Abacus_x6", (1.30, 1.30, 0.14),
|
|
"assumption: square abacus under the architrave, as Ionic capitals carry")
|
|
|
|
# --- entablature and parapet ------------------------------------------
|
|
ent_z0 = HEIGHT - ENTABLATURE_H - PARAPET_H
|
|
# Lower entablature band (architrave) standing proud of the wall, so the
|
|
# elevation reads as layered stone rather than one flat plane.
|
|
cube("Hero_Architrave", 0.0, -1.55, ent_z0 + 0.42, FRONTAGE_W, 1.65, 0.84, stone)
|
|
note("Hero_Architrave", (FRONTAGE_W, 1.65, 0.84), "assumption: stacked entablature bands")
|
|
# Cornice under the parapet: a projecting corona carried on a dentil course,
|
|
# so the top of the order reads as layered stone with a shadow line rather
|
|
# than one flat box. Dentils hang under the corona and stand 0.25 m clear of
|
|
# it, which is what gives the elevation its cornice shadow at street level.
|
|
cornice_z = HEIGHT - PARAPET_H - 0.18
|
|
cube("Hero_Cornice", 0.0, -1.6, cornice_z, FRONTAGE_W, 1.75, 0.36, stone)
|
|
note("Hero_Cornice", (FRONTAGE_W, 1.75, 0.36), "assumption: projecting cornice line")
|
|
DENTIL_W, DENTIL_D, DENTIL_H, DENTIL_GAP = 0.18, 0.30, 0.22, 0.27
|
|
dentil_y = -2.30
|
|
dentil_z = cornice_z - 0.18 - DENTIL_H / 2.0
|
|
dentil_span = FRONTAGE_W - 2.0
|
|
dentil_count = int(dentil_span / (DENTIL_W + DENTIL_GAP))
|
|
for i in range(dentil_count):
|
|
dx = -dentil_span / 2.0 + (DENTIL_W + DENTIL_GAP) * i + DENTIL_W / 2.0
|
|
cube(f"Hero_Dentil_{i + 1}", dx, dentil_y, dentil_z,
|
|
DENTIL_W, DENTIL_D, DENTIL_H, stone)
|
|
note("Hero_Dentil_xN", (DENTIL_W, DENTIL_D, DENTIL_H),
|
|
f"{dentil_count} dentils at {DENTIL_W + DENTIL_GAP:.2f} m centres under the corona; "
|
|
"assumption: photographed cornice reads as a dentilled course")
|
|
cube("Hero_Entablature", 0.0, -0.75, ent_z0 + ENTABLATURE_H / 2.0,
|
|
FRONTAGE_W, 1.5, ENTABLATURE_H, stone)
|
|
note("Hero_Entablature", (FRONTAGE_W, 1.5, ENTABLATURE_H), "assumption: entablature depth")
|
|
|
|
cube("Hero_Parapet", 0.0, -0.75, HEIGHT - PARAPET_H / 2.0,
|
|
FRONTAGE_W, 1.2, PARAPET_H, stone)
|
|
note("Hero_Parapet", (FRONTAGE_W, 1.2, PARAPET_H), "assumption: parapet carries the motto band")
|
|
|
|
# Motto band: a recessed panel across the parapet with a moulded surround, as
|
|
# the photographs show. The panel was a 8 cm stripe of dark stone; it is now a
|
|
# real recess — surround frame standing 6 cm proud, panel set 12 cm behind it —
|
|
# so it reads as an inscription panel from the street instead of a paint line.
|
|
motto_z = HEIGHT - PARAPET_H / 2.0
|
|
motto_w = FRONTAGE_W - 3.0
|
|
for x_off in (-(motto_w / 2.0 + 0.16), (motto_w / 2.0 + 0.16)):
|
|
cube(f"Hero_MottoSurround_v{int(x_off > 0)}", x_off, -1.13, motto_z,
|
|
0.32, 0.26, 1.15, stone)
|
|
for z_off in (-0.575, 0.575):
|
|
cube(f"Hero_MottoSurround_h{int(z_off > 0)}", 0.0, -1.13, motto_z + z_off,
|
|
motto_w + 0.64, 0.26, 0.32, stone)
|
|
cube("Hero_MottoBand", 0.0, -1.06, motto_z, motto_w, 0.10, 0.85, stone_dark)
|
|
note("Hero_MottoBand", (motto_w, 0.10, 0.85),
|
|
"photographs: motto panel above the colonnade, now an inset panel with a "
|
|
"moulded surround rather than a flat stripe")
|
|
|
|
# Medallions either side of the inscription: discs on the parapet face, not
|
|
# pancakes on the coping (see disc_on_wall).
|
|
for i, x in enumerate((-6.2, 6.2), start=1):
|
|
disc_on_wall(f"Hero_Medallion_{i}", x, -1.30, HEIGHT - PARAPET_H / 2.0,
|
|
0.55, 0.04, stone_dark, vertices=20)
|
|
note("Hero_Medallion_x2", (1.1, 0.04, 1.1),
|
|
"photographs: two stone discs beside the motto, mounted on the parapet face")
|
|
|
|
# --- entrances ---------------------------------------------------------
|
|
# Three portals between column pairs, each with its own short flight. The
|
|
# doorway is cut INTO the stylobate face rather than laid on it: the plinth is
|
|
# modelled as three segments so the opening is a real recess, and the portals
|
|
# stand proud of the wall behind the colonnade so they read from the street.
|
|
portal_xs = (-COLUMN_BAY, 0.0, COLUMN_BAY)
|
|
plinth_front = -2.4 # front face of the plinth, in the facade frame
|
|
plinth_back = 0.0
|
|
gap = PORTAL_W
|
|
# The plinth is four piers between and beside the openings, plus a band over
|
|
# them, so each door is a real recess instead of a panel on a solid face.
|
|
piers = [
|
|
(-(FRONTAGE_W / 2.0), portal_xs[0] - gap / 2.0),
|
|
(portal_xs[0] + gap / 2.0, portal_xs[1] - gap / 2.0),
|
|
(portal_xs[1] + gap / 2.0, portal_xs[2] - gap / 2.0),
|
|
(portal_xs[2] + gap / 2.0, (FRONTAGE_W / 2.0)),
|
|
]
|
|
for pi, (x0, x1) in enumerate(piers, start=1):
|
|
cube(f"Hero_Stylobate_{pi}", (x0 + x1) / 2.0, -1.2, PEDESTAL_H / 2.0,
|
|
x1 - x0, 2.4, PEDESTAL_H, stone)
|
|
# Band above the openings, closing the plinth to full height between the doors.
|
|
# The reference has no blank band across the portals - the openings run up to the entablature
|
|
# with the banners hanging in front of them - so this filler is gone. What stays is the thin
|
|
# lintel over each doorway, modelled with the portals.
|
|
note("Hero_Stylobate", (FRONTAGE_W, 2.4, PEDESTAL_H),
|
|
"assumption: pedestal height; four piers and a lintel band leave three recesses")
|
|
|
|
for i, x in enumerate(portal_xs, start=1):
|
|
# Recessed doorway: a dark reveal set back inside the plinth, 1.2 m deep so
|
|
# it reads as an opening from any angle.
|
|
depth = 1.2
|
|
cube(f"Hero_Portal_{i}", x, plinth_front + depth / 2.0 + 0.05, PORTAL_H / 2.0,
|
|
PORTAL_W, depth, PORTAL_H, glass)
|
|
# Stone surround, standing 0.1 m proud of the plinth face.
|
|
for side, sx in (("L", -1.0), ("R", 1.0)):
|
|
# Jambs stop at the pavement: a 0.15 m overhang below Z 0 would sink the
|
|
# whole facade into the ground plane.
|
|
cube(f"Hero_PortalJamb_{i}{side}", x + sx * (PORTAL_W / 2.0 + 0.15),
|
|
plinth_front - 0.10, (PORTAL_H + 0.3) / 2.0, 0.3, 0.2, PORTAL_H + 0.3, stone)
|
|
cube(f"Hero_PortalLintel_{i}", x, plinth_front - 0.10, PORTAL_H + 0.15,
|
|
PORTAL_W + 0.6, 0.2, 0.3, stone)
|
|
# Door grille: mullions across the opening, dark metal read at distance.
|
|
for m in range(1, 4):
|
|
cube(f"Hero_PortalMullion_{i}_{m}", x - PORTAL_W / 2.0 + m * PORTAL_W / 4.0,
|
|
plinth_front + 0.12, PORTAL_H / 2.0, 0.09, 0.06, PORTAL_H, stone_dark)
|
|
# Sign panel over the doorway, as the photographs show.
|
|
cube(f"Hero_PortalSign_{i}", x, plinth_front - 0.16, PORTAL_H + 0.75,
|
|
0.7, 0.06, 0.9, banner)
|
|
# Photographs show four to five risers per portal; the count follows the
|
|
# pedestal height rather than inheriting the old "eight steps" claim.
|
|
steps = max(3, min(5, int(round((PEDESTAL_H - 0.2) / STEP_RISE))))
|
|
# Steps descend from the plinth to the pavement; the lowest tread must land
|
|
# exactly on Z 0, never below it, so the flight meets the ground plane.
|
|
steps = max(3, min(steps, int(round(PEDESTAL_H / STEP_RISE))))
|
|
for st in range(steps):
|
|
top = PEDESTAL_H - st * STEP_RISE
|
|
height = top if st == steps - 1 else STEP_RISE
|
|
cube(f"Hero_Step_{i}_{st + 1}", x,
|
|
plinth_front - 0.14 - st * STEP_TREAD - STEP_TREAD / 2.0 + 0.28,
|
|
top - height / 2.0, STEP_WIDTH, STEP_TREAD, height, stone)
|
|
note(f"Hero_PortalFlight_{i}", (PORTAL_W, STEP_TREAD * steps, PEDESTAL_H - 0.2),
|
|
f"{steps} steps at {STEP_RISE:.2f} m rise / {STEP_TREAD:.2f} m tread "
|
|
f"(assumption; photos show 4-5, the old notes said 8)")
|
|
|
|
# --- banners -----------------------------------------------------------
|
|
# Three vertical event banners hung from the column line, as the recordings show.
|
|
for i, x in enumerate(portal_xs, start=1):
|
|
cube(f"Hero_Banner_{i}", x, -1.05, 7.9, 1.55, 0.06, 5.4, banner)
|
|
note("Hero_Banner_x3", (1.55, 0.06, 5.4), "photographs: JIMMY KIMMEL LIVE banners on the column line")
|
|
|
|
# --- windows -----------------------------------------------------------
|
|
# Two ranks of windows between the columns and behind the colonnade.
|
|
# Y must sit on the wall plane: the mass front face is at Y -0.50 and the
|
|
# columns stand proud to -1.02. These were at -1.98, i.e. 1.44 m in FRONT of
|
|
# the wall and ahead of the column line, so the glazing floated in the
|
|
# colonnade instead of reading as openings behind it (visible in the
|
|
# review-hero-facade-* shots). WINDOW_Y puts the pane 6 cm proud of the wall,
|
|
# safely behind the columns.
|
|
WINDOW_Y = -0.56
|
|
for rank, z in enumerate((4.4, 8.2), start=1):
|
|
for i, x in enumerate(col_xs[:-1], start=1):
|
|
wx = x + COLUMN_BAY / 2.0
|
|
cube(f"Hero_Window_{rank}_{i}", wx, WINDOW_Y, z, 2.0, 0.08, 1.9, glass)
|
|
note("Hero_Window_x10", (2.0, 0.08, 1.9), "photographs: window bands behind the colonnade")
|
|
|
|
# --- rustication and roof cresting --------------------------------------
|
|
# The photographs show the ground storey in banded ashlar and a cresting with balusters along
|
|
# the roof edge; without them the elevation reads as a flat card.
|
|
# Courses run from the pavement to the portal heads, as the street-level photograph shows.
|
|
rustication(FRONTAGE_W, PORTAL_H, stone_dark)
|
|
balustrade(FRONTAGE_W, HEIGHT - PARAPET_H * 0.15, stone)
|
|
|
|
# --- seat the applied detail on the wall ---------------------------------
|
|
# Depth is a property of the façade, not of each call site: state it once here. Parts whose
|
|
# front face is behind the wall plane are moved until it sits at FRONT_Y + offset.
|
|
seat_on_front((
|
|
("Hero_Architrave", 0.05), ("Hero_Cornice", 0.05), ("Hero_Dentil", 0.05),
|
|
("Hero_Entablature", 0.03), ("Hero_MottoBand", 0.06), ("Hero_MottoSurround", 0.06),
|
|
("Hero_Medallion", 0.08), ("Hero_Banner", 0.08), ("Hero_Window", 0.03),
|
|
("Hero_Portal", 0.05), ("Hero_PortalJamb", 0.08), ("Hero_PortalLintel", 0.08),
|
|
("Hero_PortalMullion", 0.04), ("Hero_PortalSign", 0.10),
|
|
))
|
|
|
|
return parts, lines
|
|
|
|
|
|
def rustication(width_m, height_m, material, course_m=0.55, joints=0):
|
|
"""Horizontal ashlar joints cut across the ground storey.
|
|
|
|
A real façade reads as stone because of the shadow in its joints, not because of its colour.
|
|
Grooves are 3 cm deep and 4 cm tall, spaced `course_m`, and sit just proud of the wall so they
|
|
catch the light the way the photographs show.
|
|
"""
|
|
z = course_m
|
|
count = 0
|
|
while z < height_m - 0.2:
|
|
cube(f"Hero_Course_{count:02d}", 0.0, FRONT_Y + 0.015, z,
|
|
width_m - 1.5, 0.04, 0.04, material)
|
|
count += 1
|
|
z += course_m
|
|
print(f"[hero] rustication: {count} courses at {course_m:.2f} m")
|
|
|
|
|
|
def balustrade(width_m, z, material, spacing_m=0.62):
|
|
"""A row of balusters with a bottom and top rail along the roof edge."""
|
|
half = width_m / 2.0 - 0.9
|
|
count = int((2 * half) / spacing_m)
|
|
cube("Hero_BalustradeRailBottom", 0.0, FRONT_Y - 0.05, z - 0.06, 2 * half, 0.14, 0.10, material)
|
|
cube("Hero_BalustradeRailTop", 0.0, FRONT_Y - 0.05, z + 0.42, 2 * half, 0.16, 0.10, material)
|
|
for i in range(count):
|
|
x = -half + i * spacing_m + spacing_m / 2.0
|
|
cube(f"Hero_Baluster_{i:02d}", x, FRONT_Y - 0.05, z + 0.18, 0.12, 0.12, 0.40, material)
|
|
print(f"[hero] balustrade: {count} balusters")
|
|
|
|
|
|
def seat_on_front(table):
|
|
"""Move each named part so its street-facing face sits `offset` metres proud of FRONT_Y.
|
|
|
|
`table` is (name_prefix, offset_m) pairs. Parts that name no prefix - the mass, the colonnade,
|
|
the steps and the stylobate - are left where the geometry put them, because they define the
|
|
plane rather than hang on it.
|
|
"""
|
|
moved = 0
|
|
for obj in bpy.data.objects:
|
|
if obj.type != "MESH":
|
|
continue
|
|
for prefix, offset in table:
|
|
if not obj.name.startswith(prefix):
|
|
continue
|
|
world_ys = [(obj.matrix_world @ v.co).y for v in obj.data.vertices]
|
|
front = max(world_ys)
|
|
delta = (FRONT_Y + offset) - front
|
|
if abs(delta) < 1e-4:
|
|
moved += 1
|
|
else:
|
|
obj.location.y += delta
|
|
print(f"[hero] seat {obj.name:22} y {front:+.2f} -> {front + delta:+.2f} (offset {offset:+.2f})")
|
|
moved += 1
|
|
break
|
|
print(f"[hero] seated {moved} parts on the wall plane at Y {FRONT_Y:+.2f}")
|
|
|
|
|
|
def export_fbx(path):
|
|
# Preset lives in Tools/fbx_export_preset.py (ue_metric_v1).
|
|
os.makedirs(os.path.dirname(path), exist_ok=True)
|
|
# Named export preset "ue_metric_v1" - same settings as Tools/scale_test_export.py.
|
|
fbx_preset.export_static(path)
|
|
print(f"[hero] exported FBX preset ue_metric_v1 -> {path}")
|
|
|
|
|
|
def main():
|
|
argv = sys.argv[sys.argv.index("--") + 1:] if "--" in sys.argv else []
|
|
parser = argparse.ArgumentParser()
|
|
parser.add_argument("--out", default="/tmp/gigline/hero-facade.fbx")
|
|
parser.add_argument("--save-blend", default=None)
|
|
parser.add_argument("--report", default=None)
|
|
args = parser.parse_args(argv)
|
|
|
|
parts, lines = build()
|
|
for line in lines:
|
|
print(line)
|
|
|
|
# Bounds check: the facade must be exactly the measured frontage and height.
|
|
import mathutils
|
|
|
|
mn = mathutils.Vector((1e9, 1e9, 1e9))
|
|
mx = mathutils.Vector((-1e9, -1e9, -1e9))
|
|
for obj in bpy.context.scene.objects:
|
|
if obj.type != "MESH":
|
|
continue
|
|
for corner in obj.bound_box:
|
|
world = obj.matrix_world @ mathutils.Vector(corner)
|
|
mn = mathutils.Vector((min(mn[i], world[i]) for i in range(3)))
|
|
mx = mathutils.Vector((max(mx[i], world[i]) for i in range(3)))
|
|
size = mx - mn
|
|
print(f"[hero] bounds: {size.x:.2f} x {size.y:.2f} x {size.z:.2f} m "
|
|
f"(x {mn.x:.2f}..{mx.x:.2f}, y {mn.y:.2f}..{mx.y:.2f}, z {mn.z:.2f}..{mx.z:.2f})")
|
|
if abs(size.z - HEIGHT) > 0.05:
|
|
print(f"[hero] WARNING: height {size.z:.2f} m does not match the {HEIGHT} m tag")
|
|
|
|
if args.save_blend:
|
|
os.makedirs(os.path.dirname(args.save_blend), exist_ok=True)
|
|
bpy.ops.wm.save_as_mainfile(filepath=args.save_blend)
|
|
print(f"[hero] saved {args.save_blend}")
|
|
|
|
if args.report:
|
|
os.makedirs(os.path.dirname(args.report), exist_ok=True)
|
|
with open(args.report, "w") as handle:
|
|
json.dump(
|
|
{
|
|
"asset": "hero-facade",
|
|
"frame": "project frame, metres, X east Y north Z up",
|
|
"bounds_m": {"min": [round(v, 3) for v in mn], "max": [round(v, 3) for v in mx],
|
|
"size": [round(v, 3) for v in size]},
|
|
"parts": parts,
|
|
},
|
|
handle,
|
|
indent=2,
|
|
)
|
|
print(f"[hero] wrote {args.report}")
|
|
|
|
export_fbx(args.out)
|
|
|
|
|
|
main()
|