--shots was parsing a table shape the README no longer has, so it silently found nothing.
It now reads Tools/visual_targets.json, the same file the render gate uses, and reports one
line per shot with the model's verdict and reasoning.
The result is not good news and is committed as such: 0 of 9 shots judged 'yes'. Shot 7 shows
the scene itself wrong - a disassembled car floating over a blank surface with no street or
buildings in frame - and the others fail for missing detail rather than for a broken frame.
visual_loop --verify still reports 9/9, because it only measures exposure and size.
A warning now sits at the top of Screenshots/README.md: treat every image there as stale until
the scene is fixed. The cause is not yet identified - the map builder's recent changes are 15
lines of vehicle staging, which does not explain a missing street.
The probe was armed from BeginPlay but the delay was lost when I removed the dead block, so
it never ran. Armed properly, three seconds after spawn, from the capsule's feet, on three
channels:
GigLine foot Visibility after settling: actor Z 456, feet 369, hit Z 366
The character stands 3 cm above the road - the capsule skin - and the car sits at 367 on the
same measured surface with the model grounded on its wheels in Blender.
Both previous hand-tuned values were wrong, and wrong in opposite directions: the player
start did not need 561 (the capsule settles at 456), and the car had been placed at 342,
24 cm INTO the road, compensating for the wheel-grounding error that is now fixed. That is
the cost of tuning against a measurement taken while the pawn was still falling.
The windows material was metallic 1.0 with roughness 0.0, which renders as a black void -
indistinguishable from a cabin with no glass at all. It is now tinted translucent: opacity
0.85, roughness 0.08, dark blue-grey base. The windscreen and side glass read as glass.
Opacity 0.45 was tried first and was worse than either extreme: the glass became invisible
and the greenhouse looked open again. The number is recorded in the tool's log line so the
next person does not repeat it.
The vision judge still returns verdict=no for this frame, disputing that the glazing is dark
and the wheels visible. The image shows both. It is an advisory helper - AGENTS.md says it
never replaces the human verdict - so the disagreement is written into
Screenshots/README.md rather than being resolved by iterating against the model.
Root cause was in the template, not the import path: 'car paint' is a legacy mix-shader
graph. The FBX exporter cannot map that node tree, so SM_Vehicle_Body imported holding
WorldGridMaterial - the engine's checker fallback - and rendered black while Blender showed
red.
Two changes:
- Tools/vehicle_from_template.py converts legacy graphs to a Principled BSDF before export
and picks the SATURATED colour from the mix nodes; a 'brightest wins' rule chose the 0.8
grey diffuse beside the 0.49 red and produced a grey car.
- Tools/ue_vehicle_materials.py creates M_Vehicle_HatchPaint, and the staged body panel
gets it assigned at build time, because a static mesh slot cannot be repointed from
Python after import.
Judge on the new capture: verdict=yes confidence=0.9 - 'a red hatch car with a red body and
dark wheels parked on a road'. The comparison table in Screenshots/README.md now shows both
columns agreeing on colour.
Still open and recorded: the glazing does not read - the greenhouse looks open, so the glass
system is mispositioned or drawn behind the body.
Both floats had different causes and both were measured.
Character: the player start sat at Z 600 while the capsule settles at Z 561 on this
pavement - the QA self-test has been reporting that settle height all along - so the soles
hung 39 cm in the air. The start now uses the measured 561.
Car: the template's lowest geometry is exhaust and underbody, so grounding the model on its
whole bounding box left the tyres 4 cm above the origin. It is grounded on its WHEELS now.
The staged height is 342 rather than the traced road height of 366, because at 367 the
render still showed a gap: the trace and the visible road mesh disagree by about 25 cm at
that spot, and the number is recorded as empirical rather than derived.
Also adds a foot-contact log to the character at BeginPlay (actor Z, ground, capsule half,
mesh bottom, gap) so the next float is a measurement rather than a look.
The invisible-vehicle defect is closed. Shot 9 now shows the car instead of an empty road.
Tools/vehicle_from_template.py converts Art/blender/vehicle/hot hatch.blend into UE-ready
assets, following two skills:
vehicle-artist - systems split (body 113k tris, trim 10.5k, glass 20.5k, lights 18.6k,
wheels 47.8k), one UCX_ hull 1.45 x 3.94 x 0.76 m, two decimated LODs at 39.7k and 13.6k.
unreal-export - scale normalised to a documented 4.05 m hot hatch before export (the
template measures 7.26 m, factor 0.5579), then verified after import: body bounds
1.51 x 4.02 x 1.22 m against the 4.05 m target.
Staged as five plain StaticMeshActors, because the earlier probe proved those render while
the same meshes attached to the vehicle pawn do not.
Open and recorded rather than hidden: judge_screenshot returns verdict=no confidence=0.9 -
the silhouette does not read as a hot hatch from this angle and the car floats slightly.
The likely causes are a system misclassification in the template conversion and an
origin-height error of a few centimetres.
Decisive experiment: the same SM_Vehicle_Body staged as a plain StaticMeshActor 5.5 m
from the pawn renders, while the panels attached to the vehicle pawn do not - with
visible=1, the right mesh name, a 238 cm extent, MarkRenderStateDirty() and
UpdateBounds() all in place. The asset and its material are fine; the pawn's component
hierarchy is what keeps them out of the renderer.
So the car is now staged as nine plain StaticMeshActors (body, glass, front/rear lights,
mirrors, four wheels) alongside the physics pawn: visible, and not yet attached to the
driving pawn. A visible car that does not drive yet beats an invisible one that does.
Two defects found by the tools while chasing this, both fixed: the demo builder staged the
vehicle twice per run (the scene audit caught the duplicate label), and clear() could leave
actors behind, so it now repeats until nothing is removed.
Measured rather than guessed: a downward trace from the spawn point reports the road
surface at Z 366 cm, while the vehicle was spawned at Z 120. The car was buried; the only
thing visible in the capture was its shadow falling on the road above it. Spawn is now
Z 470, the camera aims at 430, and it settles at Z 470.
Not fixed, and recorded: with the car above ground the capture still shows road and a
shadow with no car. Panels register, report visible=1 with mesh=SM_Vehicle_Body and a
238 cm extent at the expected position, and MarkRenderStateDirty()/UpdateBounds() run
after registration. The shadow proves a collider is there; the visible geometry is not.
Screenshots/README.md now separates the two causes so the next person does not re-fix the
buried spawn.
Adds demo-vehicle to the camera list and the visual targets, plus shot 9 in
Screenshots/README.md - marked FAIL, because that is what it shows.
The vehicle is staged and runs: spawned at (-12950,-900,120), 9 visual panels attached,
panel 0 visible with a 238 cm extent, settled at Z 119 cm. The capture shows an empty road
with a soft shadow. Two checks disagree in a useful way: visual_loop --verify PASSES the
frame (it only tests size, blankness and tonal range, so a well-exposed empty road passes),
while judge_screenshot returns verdict=no confidence=1.0.
Strongest clue, recorded in TODO.md: a downward trace from the vehicle finds no ground at
all (ground at Z -9999), so the car sits over a surface without collision or inside
geometry - the shadow and the panels are not in the same place.
Diagnostics added along the way: mesh/visibility/bounds at BeginPlay, per-panel world
positions and extents, and the ground trace. The visual panels were also unhidden from the
physics mesh: SetVisibility(false, ...) hid them whether or not propagation was requested.
With the spring arm activated the collision now works: a 2 m wall spawned 4 m behind the
pawn shortens the boom from 340 cm to 288 cm - 12 cm clear of the wall, matching the probe
size. -cameratest logs it, writes a placement screenshot, and the measurement is recorded
as a release check for 0.2.3.
Two traps documented because each one made a working mechanism look broken:
- a spawned static-mesh actor has no collision unless it is created deferred and given
its mesh and collision before FinishSpawning (three runs reported blocks trace=0)
- TargetArmLength is not rewritten when the boom shortens, so reading the property
reports the requested length; the camera's distance from the head is the measurement
Writes the 0.2.3 changelog entry and prunes the section from TODO.md.
The skin was never grey. A red test colour reached the render and the slot was confirmed
holding M_Character_Skin, so the material and the assignment were both fine - the body
was simply standing in building shadow and lit almost entirely by the blue skylight
(intensity 2.6). Warm skin under blue fill reads blue-grey.
Raising the sun from pitch -62 to -74, same camera:
face (99, 98, 100) -> (131, 121, 117)
arms (67, 74, 81) -> (71, 78, 85)
This touches every approved shot, so it sits on the branch for the owner's approval
rather than being folded in. Also records that the Unreal commandlet silently drops
unknown switches, which is why a --unlit-test flag never took effect.
The hair read blond and thin because the strand sheet's RGB was driving base colour; the
sheet is a pale highlight map. Colour is now a dark constant (0.030/0.020/0.014) and the
texture supplies only alpha. Sampled in the render: hair (31, 26, 21).
Skin: the assignment is not the problem and the red test proved it - a runtime log shows
the slot holding M_Character_Skin, a deliberate red constant reached the render, yet the
intended warm tone samples as bluish grey (arms 67,74,81 / face 98,97,100) while the tee
and jeans show their colours correctly. Recorded in TODO.md with the next suspects rather
than guessed at.
The temporary material log is removed again.
Solidify thickness went from 1 cm to 2 cm and the shell is fattened 8 mm along its own
normals afterwards. That closed the shoulders, hips and knees where the body was
showing through the cloth.
Evaluation against the blueprint, same shot and box before and after:
mean deltaE 31.9 -> 21.8
palette deltaE 25.4 -> 19.7
aspect delta 1.24 -> 1.22
Also fixes a crash I introduced: binding the materials in Tick used
ConstructorHelpers::FObjectFinder, which is fatal outside a constructor - the game died
with 'FObjectFinders can't be used outside of constructors' and the render run failed
with signal 11. The binding now lives in BeginPlay and uses LoadObject.
Not fixed, and recorded: the arms and face still render neutral grey, so
M_Character_Skin itself is suspect rather than the assignment.
Follows the character-artist clothing workflow literally: duplicate the body's own
faces for the garment base, solidify for cloth thickness, and keep each piece a
separate mesh. Attached as leader-pose components beside the hair, so no second rig.
- Tools/character_clothing_build.py builds three garments from the body mesh, trimmed
geometrically (height band plus a width limit) instead of by dominant bone: the bone
filter left holes wherever a face's strongest bone was outside the allowed list.
- Tools/ue_character_clothing_import.py imports them as CharacterTee / CharacterJeans /
CharacterShoes, each arriving with its own single material slot.
- The pawn attaches all three, hidden with the body in first person.
Three traps recorded in MEMORY.md, each of which cost a build: MPFB weights its helper
geometry to groups that dominate every vertex, Blender refuses to apply a modifier to a
mesh with shape keys, and object-mode polygon selection is discarded on entering edit
mode - the delete wiped the whole garment.
Known defects, in TODO.md: the garments have coverage holes at shoulders, hips and
knees, and the hair reads light and wispy since its material was repointed to the
masked strand sheet.
Two tools that turn character work into something measurable.
- Tools/comfyui_character_blueprint.py generates a four-view sheet (front, side, back,
head) plus a contact sheet from one description, with fixed seeds and a JSON record
of prompts and prompt ids. First sheet: 'GigLine walker', lean pedestrian in a navy
tee, jeans and sneakers.
- Tools/character_match.py compares a rendered character against a sheet: figure
aspect, fill and coverage deltas, mean CIE76 colour distance, dominant-palette
distance, and a side-by-side montage. The deltas stay separate on purpose - a single
similarity score between a photoreal sheet and a low-detail body would be a number
with no meaning.
- comfyui_generate.py grew wait_for_image() so both tools share the polling path
instead of duplicating it.
- 13 unit tests for the colour maths, masks and palette; 95 tool tests pass.
First real result, recorded rather than smoothed over: aspect delta 1.24, fill delta
0.12, mean deltaE 31.9, palette deltaE 25.4. The montage shows the reason - the model
is a nude body and the blueprint wears a tee and jeans, so clothing dominates every
metric. Figure segmentation is explicit (--render-box): auto-detection picked backdrop
blobs on every attempt, and a background plate is the proper fix.
The first card build anchored every card on a fixed outward vector, so the silhouette
was a spiked crown. Each card is now oriented from the scalp normal at its anchor: the
length runs along the downward tangent, the width across it, and a small tip lift gives
the cut volume. Three overlapping rows (7/9/10) replace the single ring; overlap is
what stops cards reading as separate spikes.
26 cards, 401 verts, 224 quads, 468 tris, still all quads on one head bone.
Recorded as still open: the skin renders darker than the baked diffuse suggests, and
the generated pore and strand textures remain unwired because the material-editing
tool segfaults in the headless commandlet.
Follows the character-artist skill on two points it is explicit about: hair for a
game character is a card system, and swappable parts stay separate meshes.
- Tools/character_hair_build.py builds SM_Char_Hair: a scalp cap plus 18 cards in
three rings, quads only, every vertex weighted 1.0 to the head bone, UV-mapped for
the strand sheet from Tools/generate_character_textures.py. 321 verts / 404 tris.
- Tools/ue_character_hair_import.py imports it as its own skeletal mesh, which is the
point: joined into the body, Unreal collapses the second material slot and the hair
renders with the skin material.
- The pawn carries it as a second USkeletalMeshComponent on SetLeaderPoseComponent, so
it follows the head bone with no second rig and hides with the body in first person.
Still wrong and recorded: the cards point outward, so the silhouette reads as a spiked
crown rather than a short cut. The next pass orients them tangentially along the
skull with a second overlapping row. Tools/ue_character_materials.py also segfaults in
the headless commandlet when editing a material graph, so the generated textures are
not wired yet and the hair keeps its Blender base colour.
The stride shot regressed twice for two different reasons, and only the second was
the clip. The walk cycle was authored on a sine, which is zero at both the start and
the middle of the cycle - exactly the two frames where the legs pass together - so a
deterministic capture at any phase near those frames read as a still. The probe
proved it: frames 0 and 15 carried identical hip rotations while 7 and 22 were the
stride.
The cycle now starts at maximum stride (cosine). Length, amplitudes, keys and loop
are unchanged; only the phase moved. demo-third-person-walk is back as shot 8 and
shows a genuine stride with the curled hands from 0.2.1.
8/8 shots verify.
zwitschi
