The shot actor can now photograph a moving pawn: a per-shot ShotFollow flag re-places
the camera every frame at a fixed offset in the pawn's frame, and the walk is driven
per shot (SetReviewWalk) with the pawn returned to spawn after a follow shot, so the
fixed-camera shots later in the list still find it in place. With that, the capture
stopped depending on where a 4.5 m/s pawn happened to be.
Two further bugs fixed on the way:
- the engine's screenshot folder is cleared before each run. The collect step copies
every review-*.png it finds in Saved/, so a shot retired from the camera list kept
reappearing with byte-identical content from an older run - which is how a walk shot
that was never captured looked like a captured one.
- UpdateBodyAnimation no longer calls SetAnimation every frame. Re-setting the same
clip restarts it, which freezes the body on frame 0.
What the deterministic capture then exposed: the walk clip is applied but does not
advance - every walking frame shows the same pose (arms forward, legs together). The
stride shot is retired again rather than shipped, and TODO.md names the next step:
log GetCurrentAssetTime across frames and check the imported PlayRate. The harness
stays wired for when the clip plays.
Shots 6 and 7 were re-rendered after these changes and still pass; 7/7 verify.
Screenshots 6 and 7 are approved, so the remaining 0.2.0 work is the traversal
release check. This adds the piece of harness it needs - `-walk` holds forward input
from the first frame, so the pawn actually crosses the sidewalk while the third-person
rig follows it - and records what that check still lacks.
A stride shot was attempted three times and removed: a fixed review camera cannot
catch a pawn moving at 4.5 m/s. Each attempt framed it at a different distance and
the last two missed it entirely, so shipping it would have been a broken shot with a
green verification. The TODO item now says the blocker is the capture harness (a
camera that tracks the pawn), not the game, and names where the shot goes back in.
The flag stays because it is what the traversal check will drive.
The character now stands naturally: arms at its sides with a soft elbow bend, hands
at the hips, feet flat. Both character shots confirm it, front and back.
The root cause was not the pose. The FBX importer had been silently refusing to
replace the existing assets: after changing the arm base from 1.55 rad to 0.55 rad
and rebuilding, the imported clip returned the IDENTICAL bone quaternion
(+0.006, +0.002, -0.179, -0.984). replace_existing=True was set and delete_asset
returned False even after chmod u+w, because the pawn's constructor hard-references
the clips. Importing under a new name (CharacterV2) created fresh assets and the
same probe then returned (+0.439, +0.898) — the rotation had landed. Every earlier
attempt had been invisible for this reason.
The rotation itself is measured, not inherited: sweeping it in Blender gives 0.55 rad
for arms down and clear of the body, 0.65 for straight down against the hip, 0.75 for
past vertical and into the torso. It lives in the clamp keys, not in the bind: every
bind experiment was impossible on this shape-keyed MPFB mesh or left Unreal showing
the old bind.
Remaining, for 0.2.2: the fingers splay from the bind, and the walk clip has still
not been captured in motion.
The body stood in an A-pose while the log said the clip was playing. Two
independent defects, found by querying the imported asset instead of guessing:
1. PlayAnimation needs the component in AnimationSingleNode with a live
single-node instance. The body is hidden at construction and only unhidden by
the camera toggle, so the first call could land before the component was ready,
and the Wanted == PlayingAnimation guard then returned forever. UpdateBodyAnimation
now sets the mode, calls SetAnimation + Play, and re-asserts while the instance
is missing.
2. The arms-down offsets lived only in the clip keys. The exporter writes clip data
relative to the rest pose, so they arrived as a ±20 degree swing around an
A-posed bind - which is exactly what the pose probe measured. apply_base_pose now
bakes them into the rest pose before any clip is authored, the same trick
mpfb_character_export.py --pose idle uses. The table is applied with inverted
signs: as written, the FBX axis mapping produced arms raised in a V.
Shot 6 confirms it: the arms hang at the sides. Still open and recorded - the idle
pose reads awkwardly (arms forward, hands splayed) and the walk clip has no shot in
motion; both are marked in TODO.md and Screenshots/README.md.
Instrumentation removed; the diagnostics that remain are behind
gigline.SetupLogs.
One pawn, both rigs (ADR-9): a skeletal body hidden in first person, a
collision-tested spring arm, and a toggle that swaps the active camera and the
body's visibility. Shipped default stays first person; -thirdperson starts the
pawn in the third-person rig so the review shot is reproducible, and the
screenshot run passes it.
Three defects found and two fixed:
- The skin material had no SkeletalMesh usage flag, so Unreal silently substituted
the default grey. That is why the body rendered as clay.
- render_screenshots.sh still called ./Engine/... on this branch (the fix lives on
the facade branch and never reached main); applied here so the shots generate.
- OPEN: the idle clip is bound and PlayAnimation is called - the run logs the clip
name - but the body still renders in bind pose, arms out. Recorded with that
evidence in TODO.md rather than called done.
Shot 5 (demo-third-person) added and documented; camera collision is implemented
but unproven, since the spawn has open space behind it.
Consolidated from the qa-input-collision-fix-0.1.0 work, applied onto main so
only the changes main genuinely lacks are carried (main already merged the
walkable-demo/collision work independently).
- fix(input): populate the UE 5.8 FInputMappingContextMappingData
DefaultKeyMappings field in ue_create_input_assets.py (the runtime reads
GetMappings()->DefaultKeyMappings.Mappings; the script previously wrote only
the deprecated 'mappings' array, so the cooked game had 0 runtime mappings
and every key silently did nothing — in packaged AND PIE). Regenerated
IMC_Default.uasset. WASD/mouse/Space/R/Escape verified working.
- fix(build): drop editor-only APIs that break the game target build —
UStaticMesh::PostEditChange() (GigLineAssetTools) and AActor::GetActorLabel()
(character ground probe). GigLine and GigLineEditor now both compile clean.
- tools: OS-level uinput input harness (input_emulation.py + input_test.py) and
run_pie.sh for PIE isolation; document the PIE-vs-packaged input test in
Docs/build.md. Removed the temporary SIM/EI/screenshot diagnostics from the
character.
The reported fall-through was a misdiagnosis: the player never fell. The
imported Terrain_DEM had only a bounding-box simple collision proxy, so a
downward trace anywhere in the block hit the terrain at Z 819 (the mesh
bbox max) and the street sat under an invisible 8 m lid. Standing on that
box looked plausible, which is why it read as working.
- add UGigLineAssetTools (C++): force CTF_UseComplexAsSimple on a static
mesh. UE 5.8 dropped bUseComplexAsSimpleCollision and Python cannot set
the flag; the builder also saves the asset, since the flag lives there
and a map-only save silently reverts it.
- spawn (-13336, -1150, 600): inside the carved corridor (the cut is a
10.7 m half-width around the road centreline), lands on the road at 456.
- fix ResetToStart returning to the mid-air PlayerStart captured in
BeginPlay: StartLocation is now captured on the first grounded frame.
- HighResShot 1280x720 instead of "1280 720", which is a multiplier.
- add -qaselftest: scripted walk/reset/pause on a core ticker plus a
swept ground transect. Results: walk 746 cm/2 s with Z steady, reset
0 cm from spawn, pause/unpause 1/0, transect 84 samples 0 holes.
- rebase onto main, keeping the frontage materials and placement fixes.
Completes "Geographic attribution display" for 0.1.0. The demo is built from
OpenStreetMap data (ODbL 1.0) and needs attribution wherever the derived work
is shown, so the credit now lives in the running game, not just the documents.
- AGigLineHUD (C++): plain AHUD::DrawText in the bottom-left draws
"(c) OpenStreetMap contributors" and "Data (c) OpenStreetMap contributors,
ODbL 1.0 - openstreetmap.org/copyright", with a shadow pass so it stays
legible over bright pavement and sky. No UMG widget asset is involved, so a
cook cannot drop the attribution through a missing widget reference.
- AGigLineGameModeBase: HUDClass = AGigLineHUD, so the credit is on by default
in both the DemoMap and the ReviewMap.
- AGigLineShotActor: screenshots are requested with the UI shown, so the credit
appears in every capture under Screenshots/ - the obligation is provable from
the images rather than only described.
Docs:
- THIRD_PARTY_NOTICES records that the attribution is displayed in-game and
where the code lives.
- Screenshots/README documents the overlay.
- TODO marks the item done and narrows the remaining ODbL question to the
shipped-derivative-database posture.
Squash of branch gameplay-attribution-0.1.0 (PR #4).
- New C++ AGigLineNPCPerson: reusable NPC/pedestrian prefab built on the MPFB
human. ACharacter capsule half-height 83 cm (total 1.66 m, head top ~1.66 m
so a 1.60 m camera doesn't clip), the character skeletal mesh on the built-in
mesh as the visible body (feet on Z 0), AutoPossessAI for 0.5.0 pedestrians.
Staged at Z 0 in the review scene; captured as review-npc-prefab.png.
- AGigLineShotActor now names screenshots by stable camera name (no list-index
prefix): inserting or reordering cameras no longer renumbers files or orphans
the old ones. Re-rendered all review/demo shots with stable names.
- ue_build_review_map.py: chmod the target .umap before save_map (git marks maps
444 on checkout, silently making save_map return False and dropping stages).
- Screenshots/README.md, ROADMAP, TODO updated for the prefab + stable names.
- DemoMap.umap rebuilt by the render pipeline (north buildings + demo cameras).
Tools/ue_build_demo_map.py builds /Game/Hollywood/DemoMap: sun, sky, the hero
facade on the building line, six site meshes imported with collision, and a
player start on the north sidewalk. Tools/ue_import_site.py imports the site
FBXs; terrain, road and sidewalks use complex-as-simple so a simple hull cannot
ramp over the kerbs. Art/blender/site/export_site_fbx.py exports one FBX per
object so each can carry its own collision.
Reset (R) and pause (Escape) join the character and the input context: reset
restores the spawn transform and clears momentum, pause is a real game pause that
releases the cursor. DefaultInput.ini captures the mouse on launch.
Three placement defects found by measuring the imported actors rather than
trusting the plan: the spawn was on the wrong sidewalk because the FBX flip
inverts north, a mirror I added to the exporter double-corrected an already
correct sidewalk, and the street meshes only carry part of the north walk - the
rest is terrain.
AGigLineCharacter: 1.75 m capsule, 1.60 m eye camera, 4 m/s walk, mouse look
scaled in degrees per second (no double DeltaTime), jump. Loaded ahead of a
Blueprint so the demo is playable with no assets wired by hand.
Tools/ue_create_input_assets.py builds /Game/Input headlessly: five 1D actions
and an 11-mapping context. One action per direction instead of per-key modifiers,
because modifier objects do not survive the save path here: a mapping's modifier
array serialises None, and dimensioning a 2D move with per-key axis masks would
need exactly those modifiers. The cost is four action assets rather than two.
Also adds a fourth review camera at eye height and documents it; its approval is
pending.
- AGigLineShotActor (dev-only): walks a fixed camera list in -game mode,
captures via FScreenshotRequest, quits. Test content only.
- ue_build_review_map.py builds /Game/Test/ReviewMap from current content
(gray floor, key light, sky, MPFB character, 1 m scale cubes).
- render_screenshots.sh: build map -> run game -> collect PNGs into
gitignored Screenshots/.
- Screenshots/README.md (committed) describes each capture with approval
state; AGENTS.md gains the visual-review instructions.
AGENTS.md now states that planned work is checkbox items in ROADMAP.md marked
open, in progress, or done, and that discoveries, gotchas, notes, and bugs go to
MEMORY.md for coordination between collaborators. MEMORY.md is seeded with what
this build-up actually cost: the Unreal read-only-home crash, Blender/Blosm
headless workarounds and the spherical projection, the tiled-TIFF DEM trap, the
reference licensing and throttling rules, and the LFS silent-blob trap.
Also stages the concurrently created Unreal project files, and stops per-project
Build/ output (FileOpenOrder logs) from entering the repository.
zwitschi