Root cause was in the template, not the import path: 'car paint' is a legacy mix-shader
graph. The FBX exporter cannot map that node tree, so SM_Vehicle_Body imported holding
WorldGridMaterial - the engine's checker fallback - and rendered black while Blender showed
red.
Two changes:
- Tools/vehicle_from_template.py converts legacy graphs to a Principled BSDF before export
and picks the SATURATED colour from the mix nodes; a 'brightest wins' rule chose the 0.8
grey diffuse beside the 0.49 red and produced a grey car.
- Tools/ue_vehicle_materials.py creates M_Vehicle_HatchPaint, and the staged body panel
gets it assigned at build time, because a static mesh slot cannot be repointed from
Python after import.
Judge on the new capture: verdict=yes confidence=0.9 - 'a red hatch car with a red body and
dark wheels parked on a road'. The comparison table in Screenshots/README.md now shows both
columns agreeing on colour.
Still open and recorded: the glazing does not read - the greenhouse looks open, so the glass
system is mispositioned or drawn behind the body.
Both floats had different causes and both were measured.
Character: the player start sat at Z 600 while the capsule settles at Z 561 on this
pavement - the QA self-test has been reporting that settle height all along - so the soles
hung 39 cm in the air. The start now uses the measured 561.
Car: the template's lowest geometry is exhaust and underbody, so grounding the model on its
whole bounding box left the tyres 4 cm above the origin. It is grounded on its WHEELS now.
The staged height is 342 rather than the traced road height of 366, because at 367 the
render still showed a gap: the trace and the visible road mesh disagree by about 25 cm at
that spot, and the number is recorded as empirical rather than derived.
Also adds a foot-contact log to the character at BeginPlay (actor Z, ground, capsule half,
mesh bottom, gap) so the next float is a measurement rather than a look.
The invisible-vehicle defect is closed. Shot 9 now shows the car instead of an empty road.
Tools/vehicle_from_template.py converts Art/blender/vehicle/hot hatch.blend into UE-ready
assets, following two skills:
vehicle-artist - systems split (body 113k tris, trim 10.5k, glass 20.5k, lights 18.6k,
wheels 47.8k), one UCX_ hull 1.45 x 3.94 x 0.76 m, two decimated LODs at 39.7k and 13.6k.
unreal-export - scale normalised to a documented 4.05 m hot hatch before export (the
template measures 7.26 m, factor 0.5579), then verified after import: body bounds
1.51 x 4.02 x 1.22 m against the 4.05 m target.
Staged as five plain StaticMeshActors, because the earlier probe proved those render while
the same meshes attached to the vehicle pawn do not.
Open and recorded rather than hidden: judge_screenshot returns verdict=no confidence=0.9 -
the silhouette does not read as a hot hatch from this angle and the car floats slightly.
The likely causes are a system misclassification in the template conversion and an
origin-height error of a few centimetres.
Decisive experiment: the same SM_Vehicle_Body staged as a plain StaticMeshActor 5.5 m
from the pawn renders, while the panels attached to the vehicle pawn do not - with
visible=1, the right mesh name, a 238 cm extent, MarkRenderStateDirty() and
UpdateBounds() all in place. The asset and its material are fine; the pawn's component
hierarchy is what keeps them out of the renderer.
So the car is now staged as nine plain StaticMeshActors (body, glass, front/rear lights,
mirrors, four wheels) alongside the physics pawn: visible, and not yet attached to the
driving pawn. A visible car that does not drive yet beats an invisible one that does.
Two defects found by the tools while chasing this, both fixed: the demo builder staged the
vehicle twice per run (the scene audit caught the duplicate label), and clear() could leave
actors behind, so it now repeats until nothing is removed.
Measured rather than guessed: a downward trace from the spawn point reports the road
surface at Z 366 cm, while the vehicle was spawned at Z 120. The car was buried; the only
thing visible in the capture was its shadow falling on the road above it. Spawn is now
Z 470, the camera aims at 430, and it settles at Z 470.
Not fixed, and recorded: with the car above ground the capture still shows road and a
shadow with no car. Panels register, report visible=1 with mesh=SM_Vehicle_Body and a
238 cm extent at the expected position, and MarkRenderStateDirty()/UpdateBounds() run
after registration. The shadow proves a collider is there; the visible geometry is not.
Screenshots/README.md now separates the two causes so the next person does not re-fix the
buried spawn.
Adds demo-vehicle to the camera list and the visual targets, plus shot 9 in
Screenshots/README.md - marked FAIL, because that is what it shows.
The vehicle is staged and runs: spawned at (-12950,-900,120), 9 visual panels attached,
panel 0 visible with a 238 cm extent, settled at Z 119 cm. The capture shows an empty road
with a soft shadow. Two checks disagree in a useful way: visual_loop --verify PASSES the
frame (it only tests size, blankness and tonal range, so a well-exposed empty road passes),
while judge_screenshot returns verdict=no confidence=1.0.
Strongest clue, recorded in TODO.md: a downward trace from the vehicle finds no ground at
all (ground at Z -9999), so the car sits over a surface without collision or inside
geometry - the shadow and the panels are not in the same place.
Diagnostics added along the way: mesh/visibility/bounds at BeginPlay, per-panel world
positions and extents, and the ground trace. The visual panels were also unhidden from the
physics mesh: SetVisibility(false, ...) hid them whether or not propagation was requested.
zwitschi
