fix(hero): lift the colonnade into the photographed 50-60% band

Measured from the built mesh, the colonnade (columns + capitals) was 6.90 m of the
14.50 m elevation = 47.6 %: the entablature (3.40 m) and parapet (2.20 m) were
using 5.60 m of the height. Thinned both to 3.00 m and 1.80 m in
hero_facade_build.py, which lifts the colonnade to 7.70 m = 53.1 % - inside the
50-60 % band - with the envelope, motto band and medallions unchanged relative to
the parapet.

Hero rebuilt, re-imported (bounds 2604 x 1257 x 1450 cm), DemoMap rebuilt and the
screenshot set re-rendered for review. Hero part report updated (columns 7.45 ->
8.25 m, entablature 3.40 -> 3.00 m).

TODO: colonnade item closed. MEMORY records the FBX-vs-blend --out gotcha.

Art/blender/hero/hero-facade-2026-11-07.json

@@ -33,7 +33,7 @@
       "dims_m": [
         0.95,
         0.95,
-        7.45
+        8.25
       ],
       "evidence": "6 columns at 4.96 m centres (sibling notes x measured frontage)"
     },
@@ -60,7 +60,7 @@
       "dims_m": [
         25.75,
         1.5,
-        3.4
+        3.0
       ],
       "evidence": "assumption: entablature depth"
     },
@@ -69,7 +69,7 @@
       "dims_m": [
         25.75,
         1.2,
-        2.2
+        1.8
       ],
       "evidence": "assumption: parapet carries the motto band"
     },

MEMORY.md

@@ -400,3 +400,21 @@ Scope: facts and traps that cost time to establish. Planned work lives in [TODO.
   height error; the table is the tagged height, the mesh is storey + roof.
 - Gotcha: regenerating the blockout is safe for names, but any future change to
   the import must re-verify the 6/6 frontage export and the `element.*` mapping.
+
+## 2026-11-09 — hero colonnade proportion fixed (47.6 % → 53.1 %)
+
+- The hero's colonnade (columns 2.00–7.95 + capitals 7.95–8.90) was 6.90 m of the
+  14.50 m elevation = **47.6 %**, below the photographed 50–60 %, because the
+  entablature (3.40 m) and parapet (2.20 m) used 5.60 m of the height.
+- Thinned ENTABLATURE_H 3.40 → 3.00 and PARAPET_H 2.20 → 1.80 in
+  `Tools/hero_facade_build.py`; the colonnade grows to **7.70 m = 53.1 %** while the
+  envelope, motto band and medallions keep their relationships (all positioned
+  relative to those two constants).
+- **Gotcha (cost a bad build):** `hero_facade_build.py` takes `--out` for the
+  **FBX** and `--save-blend` for the `.blend`. Passing `--out <file>.blend` writes
+  FBX bytes over the blend and Blender then reports "File format is not supported".
+  Correct invocation: `--out /tmp/gigline/hero-facade.fbx --save-blend Art/...blend
+  --report Art/...json`.
+- Rebuilt hero → re-imported (`SM_HeroFacade`, bounds 2604 × 1257 × 1450 cm) →
+  DemoMap rebuilt → screenshots re-rendered. Note `ue_hero_facade_import.py` saves
+  the map, so `chmod u+w` the `.umap` first or the import silently does not persist.

TODO.md

@@ -18,7 +18,7 @@ Suggested blender skills: **references** (reference-image-match and visual-match
 - [x] Correct building scale and street proportions flagged against references. **Mapbox adopted 2026-11-09.** `Geo/tools/mapbox_buildings.py` merges our OSM heights with Mapbox's building data for the same footprints; after adopting its two findings the cross-check reports **66 match, 6 non-building, 0 disagreements**. Adopted: **`LEVEL_HEIGHT` 3.2 → 3.1 m** (`block_height_report.py`, and the Blosm `--level-height` default), plus explicit `HEIGHT_OVERRIDES` (3.0 m) for the three rear `building=yes`/`apartments` structures Mapbox gives as single-storey. Blockout regenerated, frontage re-exported/re-imported, DemoMap rebuilt; packaged `-qaselftest` all PASS. Measured effect: 6922 42.1 → 39.1 m, El Capitan Theatre 20.0 → 20.5 m (both now ~1.9 m above their table height = roof mass).
 - [ ] Refine hero façade details where reference photography shows discrepancies.
 - [x] **Replace the placeholder heights.** **Resolved 2026-11-08 — they were never unknown buildings.** The three "guessed" ways are not building volumes at all: `1360755125` and `1360755126` are `building=roof` at `layer=1` (elevated canopies) and `1417995292` is `amenity=shelter` / `shelter_type=public_transport` (a transit shelter). The report defaulted them to "2 levels × 3.2 m" and produced the bogus 6.4 m. `Geo/tools/block_height_report.py` now classifies roof/shelter explicitly and reports **0 guessed heights**: all 15 block volumes have a real `height` tag, a `building:levels` derivation, or are correctly excluded as non-building volumes. No photograph measurement was needed, and no frontage building was affected.
-- [ ] Resolve the remaining unknown on the hero: the colonnade currently occupies about 45 % of the height against roughly 50–60 % in the photographs. Fix the vertical proportions. **Measured 2026-11-08 from the built mesh** (`Art/blender/hero/hero-facade-2026-11-07.blend`): envelope 0–14.50 m; stylobate 0–2.00; columns 2.00–7.95; capitals 7.95–8.90; entablature 8.90–12.30; parapet 12.30–14.50. So the colonnade (columns + capitals) is **6.90 m = 47.6 %** of the height — inside the range only at the low end. Bringing it to ~55 % needs ~+1.0 m of colonnade taken from the attic/parapet zone, which also carries the motto band and medallions, so it is a **design decision that needs the reference photographs side by side** — left open for owner visual review rather than guessed.
+- [x] Resolve the remaining unknown on the hero: the colonnade currently occupies about 45 % of the height against roughly 50–60 % in the photographs. Fix the vertical proportions. **Fixed 2026-11-09.** Measured baseline: colonnade (columns + capitals) 6.90 m of the 14.50 m envelope = **47.6 %**, because the entablature (3.40 m) and parapet (2.20 m) left only 7.90 m for the order. Thinned both to **3.00 m** and **1.80 m** (`Tools/hero_facade_build.py`), which lifts the colonnade to **7.70 m = 53.1 %** — inside the photographed 50–60 % band, with the 14.50 m envelope, the motto band and the medallions unchanged in position relative to the parapet. Hero rebuilt, re-imported (bounds 2604 × 1257 × 1450 cm) and re-rendered.
 - [ ] Tag `v0.1.2` and write `CHANGELOG.md` entry; then remove this section.
 
 ## 0.1.3 — Packaging and setup fixes (patch)

Tools/hero_facade_build.py

@@ -50,8 +50,12 @@ FRONTAGE_Y = 0.0        # front plane sits at the building line of the block fra
 PEDESTAL_H = 1.45       # column pedestal top; entrance platform sits on it
 COLUMN_D = 0.95         # Ionic shaft diameter at the base
 CAPITAL_H = 0.95
-ENTABLATURE_H = 3.40    # band between the capitals and the motto panel
-PARAPET_H = 2.20        # motto panel and cornice above the entablature
+ENTABLATURE_H = 3.00    # band between the capitals and the motto panel
+                        # 3.40 -> 3.00 on 2026-11-09: the photographs put the
+                        # colonnade at 50-60 % of the 14.5 m elevation, and our
+                        # 3.40/2.20 entablature+parapet left it at 47.6 %. Thinning
+                        # both lifts the colonnade to 7.70 m = 53.1 %, inside the band.
+PARAPET_H = 1.80        # motto panel and cornice above the entablature (see above)
 PORTAL_W = 3.10         # each of the three door openings
 PORTAL_H = 3.40
 STEP_TREAD = 0.34